JD 300 Starter Issues
JD 300 Starter Issues
It started fine first time out this year. Next time we went, it would click a couple times before the starter would roll and start the engine. Last time out, it just clicks when I attempt to start. Pulled the starter off and the starter runs fine direct from a battery on the bench. Assume this must be the solenoid?
-
ihengineer76
- Posts: 467
- Joined: Sat Jan 19, 2013 11:53 am
- Real Name: Tom Rehberg
- Location: SC Wisconsin
Re: JD 300 Starter Issues
When you try to start it, does it engage the bendix? A starter can turn easily on a bench when there is no resistance, but not have enough torque to turn the engine over in the sled. I’m guessing you have a failed winding in the armature.
1976 Liquidator - 970 mile raced sled
1975 340/S - I-500 raced sled
1978 440 Liquifire
1975 340/S - I-500 raced sled
1978 440 Liquifire
-
400brian
- Posts: 5611
- Joined: Wed Jul 20, 2005 12:00 am
- Real Name: James T. Kirk
- Location: South Central Wisconsin
Re: JD 300 Starter Issues
I have found the solenoids to be somewhat problematic. Sometimes they work, and then they won't, rinse and repeat.
'09 Vintage Challenge Survivor, and I wasn't late for supper!
'10, '11, '12, '13,'14,'15,'16,'17, '18, 19, 20, 21, 22 Vintage Challenge Survivor !
72 400 restored, Father bought new in '71
73 X8 restored
'74 340 green machine
'74 X8 9 time VC finisher
'78 Spitfire in progress
2 '75 340S 1 running, one on deck
'78 LF 440 future CC clone
'73 Skiroule RTX 440, 500 mi.