That may be the issue this carb is from a 92 suzuki quad 250 so it should have been a gravity feed did not know about that i'll have to look into it thanks.

Finally took it for a real ride last night, attempted to clean the carb prior and readjust float. Still got gas coming out didn't figure it was as bad as it was went about twenty miles on a half tank ended up being pulled back by a Polaris. I was told it was ruff on an old sled, but I guess I didn't...

I got it together unfortunately there seems to be an excessive amount of weight on the seat that makes the snowflap rub the ground while riding. It runs but bogs bad at idle sometimes loading up and dying I noticed that there's gas coming out of the overflow on the bottom of the float bowl possibly ...

I just wanted to apologize for fixing my snowmobile I did not realize it was going to melt all of the snow and possibly stop the snow for the rest of the winter.

Got it out now I have to find a new one. Anyone have any suggestions on how to get the bearings off of this, I got the wheel off used some pen. oil and some heat, and tried to put a socket to center up on shaft and hit it from the other side still no luck.

There is a shaft with 2 idler wheels in the middle of the track I'm trying to get off one side is threaded and the other has a bolt head. I took the wheel and nut off the one side and tried to turn the other side with no luck. Is this a bolt or is it part of a cross shaft I don't want to break it, b...

I asked dennis kirk if they knew of anyone who sold them and they hooked me up with a guy in Minnesota It's ordered and on the way but I appreciate the help. I'm from LaSalle.

I am finally working on it unfortunately I'm unable to locate right front coil spring. Took two road trips today one to a sled junkyard and one to a guys barn which ended up being a shrine to JD sleds with no luck. Does anyone make these springs still? I just picked up a 78 or so Liquifire maybe I'l...

It's a 440 I'd assume the cage was out because they didn't look at the intake rubbers and see the slit in between the intake.The way it was when I got it, the intake was laying on the bottom all lines attached carbs still on I pulled it all to clean up the carbs and intake and noticed the slice on t...

The number on the sled is 85015. More than not being a cheap hobby is the parts availability I need a suspension spring for my sportfire and I'm having a hard time finding one.I found this liquifire on craigslist he said make offer and $50 it is. The suspension and steering linkage on the liquifire ...

Picked up a Liquifire today for $50. I never have smelt a gas tank so varnished have to figure out how to get it out. The guy said he knew nothing about sleds and had a reed block out apparently for a long time. There's dirt in the intake throat used the vac and started to clean the intake and found...

I have the suspension out, unfortunately I had to cut one of the bolts on the rear left. I'll have to find some aluminum pipe at work to replace it. The shock is good, but where it mounts to on the rear looks bent(where the aluminum pipe came out of) The left rear wheel is melted from no bearings, t...

I'm back at it found the track wheels are blown out bearing retainers are just hanging out on shafts. Are these bearings easy to replace(just a sealed bearing assembly)? Still have to get the rear end apart this will be new for me, then I need to find that spring. It looks like you only need to back...