yes it has points, but it also has a stator plate. i would like to get a new one if possible.

Hey guys. anyone know where i can order a new stator for my 75 JD 300? i have a couple that i'm gonna send out to get redone. but it's nice to be able to throw a new one on.

that is the same belt i have on 2 of my 300's.

They worked well before i tore them apart.

think i will do like you said and weight them to be safe!!

Thanks guys.

they are number:
1 x2
2 x2
3 x2
4 x3.

hole size is 3/4" so weight should be the same. correct?

hey all. i have what i think is a comet 94C clutch. it has 9 weights in it. can't really see any color on the spring. no p/n or any writing that is visible to me. the weights have numbers, so do these pucks have to go in a certain order?

So expertise would be great!!

hey guys. just wondering if anyone has ever made crankshaft shims for a kohler 295? i stripped mine down and never found any shims. Do you know where someone might be able to get them?

Thanks

Hey Todd. I have a gasket/seal kit coming from MFG so i'll fix that up. the 440/21 is in a 75 300 too. after buying these 2 sleds the neighbor down the road let me know that he has a JDX6 and JDX8 that i can have. he also has a few carbs kicking around. Boy the wife is going to love me now. NOT. i w...

i ended up buying a used cover and fan off ebay. also lucked out and bought 2 machines just down the road from me for $200. one has another k295 and the other is a kec440/21. that one is seized and has broken plugs in the head. That maybe my later on project. when i get the kohlers running strong. i...

hey guys. i have a busted blade on my fan. is it a good idea to get the fin welded back on and balanced like a outboard? is there another fan i can use? very hard to find parts in Northern Ontario.

Any advice would be great.

one of the float was sticking a little. guess i didn't clean it enough.

i just cleaned my carbs and adjusted everything. i have gas leaking from the overflow now. i pulled the bowl off to check my floats. they move up and down fine. i went back in the book and found the spec for the float arm (.909) where do i measure that? do i measure from the float arm to the carb wh...

compression is 110 recoil side and 115 on clutch side. little low eh? think i read it should be between 135 and 170PSI, with no more then 10PSI variance. i've taken my carb apart and cleaned it up. looked pretty clean but there is always some gunk. i have good spark when i pull it over. plug on clut...

perfect guys. i will leave it like that for now and see how it goes.

you can buy a spray at sporting goods stores. it's ment for hockey visors. we use to spit on our hockey visors growing up. it did help but not sure if it will just freeze when your on a sled.