JDboy99 wrote:BTW, what kind of engine oil are you running in the side gear case? 5w30, 10w30, Synthetic?

Thanks again,

KV

I run 5W30 in my Intruder gear case.

At least you guys will have nice weather for it tomorrow. Nasty stuff is not suppose to hit till Sun/Mon. I'd take a drive up there but I want to get in some more fishing as long as it's going to be a nice day for a change.

That would be Ron's.
http://www.jdsleds.com/community/viewto ... 37&t=14130

If it's the same as the ones used on the Invader/Intruder/Liquifire then Polaris part # 3083894.

Jimmy wrote:My question is "What is an eraser wheel"???? And where do you get one??

http://www.youtube.com/watch?v=HHKN5_UfDik

Check your auto parts store.

This is a good site to have bookmarked for dealing with JD part numbers:
http://jdpc.deere.com/jdpc/servlet/com. ... ervlet_Alt

1A would be the early version of the Kawasaki heads. Deere heads are 2C

From the AAen installation instructions for the Invader pipes after doing the mods to the cylinders and heads. Best results were without the air box using a 38mm carb with no power jet. Jetting for 38mm carb is: 360 main jet, 35 pilot, 6DH3 needle, Q2 needle jet, 2.5 slide, no air jet. Use premium 8...

Here's the info from the installation Instructions: Move top of exhaust port up to 30mm from top of cylinder and widen it 1mm on each side. Make sure to hang adequate radiuses in corners and good chamfer on edges. Move bottom of intake port down to 25mm from bottom of cylinder skirt. Head: Machine 1...

Prototype Arctic Cat 76 Z head.

jdrob wrote:Matt MAtt what in the world did you get yourself into ?

He's come down with Mad Kawi disease lol.

Panther you have for sale is a 70.

Use to see them at Pep Boys but that has been a few years.

palepainter wrote:Looks like someone simply put the LTD pipes on the Invader. Does not look like the 4/6 motor.

LTD 4/6 pipes would have a ball socket connection at the manifold. As was pointed out on the kawasakitrax site, this is a rare high performance pipe kit and a nice find.

Have you checked the wire runs to make sure you don't have some wires that have rubbed through and are shorting somewhere?