The engine was absolutely trashed. Not much I could use. only thing I kept was the lower case, and tins. Brian Brown met up with me at A1 with another engine to use for parts as well . https://i.imgur.com/CVaObfd.jpg Got new Gaskets, and pistons from Matt at newbreed. With a lot of clean up in the s...

Got the front skis, 10in competition carbides, and shocks all mounted. She sits really low in the front.

With the rear skid in. There isn't a whole lot of adjustment for more ski pressure on the ice. I"ve seen many guys do Many different things. I wanted to keep it simple as possible. So I choose to use 2 simple hose clamps. Allows me to adjust really easy and fast for different track conditions. ...

skids all done. All been blasted and powder coated. These shaft gave me fits coming out. Took a trip to Brian Brown place for a few other parts, And he gladly showed me his air hammer method of taking them out. I installed a shorter shock on the tf rear arm to pull the rear height down and stiffen t...

Wanted to share with you guys my rear tail light. As far as oval racing goes, Most rules require a Battery powered Tail light that will be on if the sled is running or not. But this my work great for trail riders as well. This is a Led Oval light, and bracket that i purchased at my local TSC for $30...

Thanks guys. That"s really interesting Liquify. Has me thinking . It"s been a bit since my last post. I have been working nonstop on my race sled. some of it I may have flown threw it enough where i didn't get pictures. So I am going to try and play catch up here. Thans to the help of D.A ...

Looks good Joe. Id be scared to get those nos parts all crusty , that's just me though.

Now to Mount the right side. Here is a picture of how everything will sit as they are assembled https://i.imgur.com/IcsicBv.jpg Here is the front view with all the bolts tightened up so you can see the camber it will put on the carbides for the front skis. I say the Carbides Because on the ice, the ...

https://i.imgur.com/AYTrzxw.jpg Now to install the leaf spring mounts to the spindles. I will be Installing generic ski spreaders that i Had laying around. for the stk class i really don"t need anything special. They help out tremendously to add stability in the corners. How I will be mounting...

Managed to install most of the steering,Fuel Tank, Chain case, Jackshaft and mounted the fuel rebuilt fuel pump. I polished both tie rods by screwing in a 3/8-24 bolt with the head cut off. Used the cut off end to put in my air drill and used it like a lath. started out with a 220 grit. moved to a 4...

Honestly Alan I've never owned or had a sportfire taken apart to know. lol Made some progress. Although I did not finish this sled to take it to Honda East like I planned, Its still moving along. https://i.imgur.com/lu2wDVL.jpg?1 Got A Much needed box of parts from Newbreed. It was like Christmas :d...

that tank turned out great. Always wanted to try that method with the heat gun, but always to scared to wreck a decent tank.

https://i.imgur.com/azoCPr8.jpg Also got a little work in on the rear suspension. Sand blasted most of it. Still have the rails and a few more parts to go yet. I am going to be using the Tf skid, With the lf front arm. I do not need the front and middle wheels the liquifires have due to how the rea...

Before I got to carried away assembling I almost forgot one Important that needed to be installed. The tunnel Protectors. This sled will be full of razor sharp ice Pixs. Very important to get these mounted so i don't destroy the tunnel. I had a few extra sets I had purchased a year ago from Dennis K...

I was able to get my stepdaughter off her iphone for about 20 minutes. Long enough for her to assist me in re-attach the bulkhead to the tunnel. https://i.imgur.com/SSOOfN9.jpg After What felt like a million steel rivets i flipped the chassis over, Mounted the Tpr panels, spindles, steering arms and...