Looking for cyclone throttle block and throttle cable. Thanks.

My uncle has 25-30 295/s sleds. I'll see if he has this one.

Anyone ever done crank seals on an et250? Just wondering what kind of job? It has a vertical case. Any special tools needed? Any tips/help would be great!! Thanks!!

I had to send my old head gaskets to cometic. Be prepared because the cost will sting a bit.

Is there an afrermarket fuel cap available for the snow fire model? Thanks.

Hells yes! Please make this happen!

Try a product called (q bond) I've had decent luck with that for throttle blocks.

I have a rebuilt 1980 440 trailfire motor. Resealed,rings, gaskets DONE RIGHT!!! Ready to install. Includes recoil and carb. Can email pictures. $350 firm. Located in southern minnesota. Will not ship. Thanks.

I'm pretty certain I've used an oil injected trailfire cable and had good luck.

Message sent.

I know this has been talked about. I came across 4 sets of NOS TF 440 pistons WITHOUT the rings. Is there an aftermarket ring that fits the NOS art style piston? Thanks.

After taking the carb apart again I did notice that the needle jet is a P-6 -169 and the service manual says P-2 169 (which is leaner). Is this causing my flooding problem? To my understanding the needle jet only controls 1/4 throttle and above? I'm just shooting for ideas? This sled acts JUST like ...

I have a 102 on mine and used E arms with white spring. I would say it works "good". I think with some moderate tuning (trying different arms and springs) I think would really open up a bit more performance but I haven't really done much clutch tuning on it. I'm not sure if that will inter...

Snowfire vm30 mikuni wanted. Thanks.

Has anyone done a mikuni swap on a jd 400? Just wondering? Thanks.