Yup that works so much better to start now. Still have fuel residue at the intake of carb. I have adjusted the lever to .015 so I'm going to keep going down. Still boggy at the low end again.

I ran it Saturday for awhile. And somehow the bog at idle is gone but it's hard starting after sitting over night in a heated shop. The idle screw is at 1 and a quarter turn.

I got mine rebuilt and it still puked fuel out the throat when you would idle down. So I adjusted the lever inside, i went to flush or a little less it wouldn't start. Now theres barely daylight under the arm and it starts and runs good for what I think. But if you stop and idle for a minute it won'...

Okay thank you ill order one from there.

Im curious where did you find a carb kit for the walbro? I only ask cause i have seen on here that some aftermarket may cause issues.
thanks

I have a jd 500 with the original walbro WDA32 Carb, It would barely start and run. had to hold throttle a little open it would run 15 sec and die. Fuel coming out of the exhaust and carb. What is everyones idea to replace the carb with a mikuni or rebuild the walbro? I tore it down a little and it ...