Wanted: 84 Liquifire Flywheel

[Steve]

Need flywheel with ring gear for 84 Liquifire. Noticed magnets came off after removal on the one I own. Would appreciate knowledge on any other models with flywheels that could be swapped. Thanks, Steve

[Liquifire84]

Steve,

I believe you can use any of any of the kawasaki flywheels with the ring gear on it. I had to change one out with a similar problem back a few years ago and I used one off a trail and it worked fine for me. But thats my 2ct. Other may now differently.

Brice

[ljm]

Just press the ring gear off your flywheel and press it on another one

Lloyd

[Steve]

Thanks guys. I''ll be able to solve it with your suggestions.
Steve

[Liquifried]

I have a couple off 80 Liquifires

[JD600]

Has anyone confirmed that the HSR ignition uses the same flywheel? I thought they were a little different, but could be wrong.

DE

[Steve]

Thanks Dustin,
I'm wondering the same thing. I'm going to try one off an 80 trailfire. It'll be awhile before I reassemble the engine, so if someone got further insight, I'd appreciate it.

Steve

[monte44]

I am pretty positive the HSR LF used a different flywheel.

[JDT]

I did a conversion many years ago and they are not the same flywheel.

[mwking]

The flywheels and stators for the HSR ignition are different, but if you do a search on the board there was a post by Pete Duncanson (That Girl Racing) a few years back that stated that they would interchange. You can use a later HSR box with an early stator and flywheel and early CDI and coil with a HSR stator and flywheel. Here is the post: http://www.jdsleds.com/community/viewto ... 91&p=42566

[Steve]

Thanks everyone for your help. I'm excited to get the Liquifire together for this season, and this is a great forum. I appreciate a place to go for help where there's a lot of people with a common interest.

Steve