Wanted - Trailfire Right Spindle

ecardinal · Post by **ecardinal** » Mon Oct 29, 2012 4:34 pm

I need the right side spindle for an 1982 Trailfire. Right side when sitting on the sled. Please let me know what you have.

Thanks,

Eric

69camaro · Post by **69camaro** » Tue Oct 30, 2012 12:04 am

Pretty sure I have one. I don't have a parts book but I would assume a 79 Trailfire as well as 80 Sportfires use the same spindle. If they work I have one.

427cobra · Post by **427cobra** » Tue Oct 30, 2012 8:23 am

I believe I have one too. I dont think they differ from side to side either...

If Duane cant help you...let me know

smitfire · Post by **smitfire** » Tue Oct 30, 2012 8:34 am

They are different from side to side cause the right hand has the steering tie rod. The other difference is the splines.

427cobra · Post by **427cobra** » Tue Oct 30, 2012 9:50 am

Spindles are the same side to side. But you are right...the steering linkages are different.

The Liquifires used a finer spline than the Trailfires.

smitfire · Post by **smitfire** » Tue Oct 30, 2012 9:57 am

427cobra wrote:Spindles are the same side to side. But you are right...the steering linkages are different.

The Liquifires used a finer spline than the Trailfires.

Ok i was thinking steering arm. To early in the morning haha

Post by **WinnipegStPaul9** » Tue Oct 30, 2012 11:41 am

Accoirding to the parts book, <155,000 used a different one than >155,000.

DA

johnnycyclone · Post by **johnnycyclone** » Tue Oct 30, 2012 12:31 pm

WinnipegStPaul9 wrote:Accoirding to the parts book, <155,000 used a different one than >155,000.

DA

I'm not positive, but the difference is probably the size of the splines, so that would be important to know. The later models had the coarse splines, I think. I know for sure the 83 Liquifire I had, had the coarse splines.

jdrob · Post by **jdrob** » Tue Oct 30, 2012 12:58 pm

Hey guys, DA and Terre are correct the splines are different ! the early models used the fine splines and the later models used a course spline !

What he needs according to the manual would be a course spline spindle ! I will check and see if i can help also ! :lol22:

69camaro · Post by **69camaro** » Tue Oct 30, 2012 1:12 pm

I have one off of a 82 Trailfire too. I just haven't sold any parts off of it yet so if the 79 is different I have the actual 82. PM SENT

smitfire · Post by **smitfire** » Tue Oct 30, 2012 1:16 pm

69camaro wrote:I have one off of a 82 Trailfire too. I just haven't sold any parts off of it yet so if the 79 is different I have the actual 82. PM SENT

Duane Are you going to part out the 82?

69camaro · Post by **69camaro** » Tue Oct 30, 2012 2:09 pm

Yep, the whole thing.

smitfire · Post by **smitfire** » Tue Oct 30, 2012 2:26 pm

Pm sent!

Wanted - Trailfire Right Spindle

Wanted - Trailfire Right Spindle

Re: Wanted - Trailfire Right Spindle

Re: Wanted - Trailfire Right Spindle

Re: Wanted - Trailfire Right Spindle

Re: Wanted - Trailfire Right Spindle

Re: Wanted - Trailfire Right Spindle

Re: Wanted - Trailfire Right Spindle

Re: Wanted - Trailfire Right Spindle

Re: Wanted - Trailfire Right Spindle

Re: Wanted - Trailfire Right Spindle

Re: Wanted - Trailfire Right Spindle

Re: Wanted - Trailfire Right Spindle

Re: Wanted - Trailfire Right Spindle