hello again , i am in need of some dator parts can pay cash or trade for other race sled stuff , i need :
an am54172 chain case heat shield
an m66866 fuel pump bracket
an m66690 exhaust bracket
thx wade 765-918-8650
liquidator parts
Forum rules
Classified Posting Guidelines:
#1: JD snowmobile and related items only.
#2: Please do not post negative opinion comments about an item or PRICE. The only replies should be legitimate questions from interested parties.
Classified Posting Guidelines:
#1: JD snowmobile and related items only.
#2: Please do not post negative opinion comments about an item or PRICE. The only replies should be legitimate questions from interested parties.
liquidator parts
certificate recipiant of the 12 vintage challenge !! on a 78 liquifre 440,
certificate recipiant of the 13 vintage challenge !! on a 340/s
certificate recipient of the 14 vintage challenge !! on a 78 liquifire 440
joe forgot the certificates for the 2015 vintage challenge
crossed the start/finish line twice at the 2013 and 2014 I500 on a 78 liquifire 440
certificate recipiant of the 13 vintage challenge !! on a 340/s
certificate recipient of the 14 vintage challenge !! on a 78 liquifire 440
joe forgot the certificates for the 2015 vintage challenge
crossed the start/finish line twice at the 2013 and 2014 I500 on a 78 liquifire 440
-
I500
- Posts: 1264
- Joined: Thu Nov 24, 2005 1:00 am
- Real Name: Chuck Moser
- Location: Wyoming Minnesota
Re: liquidator parts
Can you make these parts too.?
Re: liquidator parts
chuck , yes these parts could be made if there is interest in a few to help defray some cost otherwise ill wing it . i have samples of each of these but need to verify a few things on them . air box bases will be done 1-5-13 or so price on them is around $60.00 with the u shaped pin you have one coming of course for providing the sample , you have any interest in the other parts ? wade
certificate recipiant of the 12 vintage challenge !! on a 78 liquifre 440,
certificate recipiant of the 13 vintage challenge !! on a 340/s
certificate recipient of the 14 vintage challenge !! on a 78 liquifire 440
joe forgot the certificates for the 2015 vintage challenge
crossed the start/finish line twice at the 2013 and 2014 I500 on a 78 liquifire 440
certificate recipiant of the 13 vintage challenge !! on a 340/s
certificate recipient of the 14 vintage challenge !! on a 78 liquifire 440
joe forgot the certificates for the 2015 vintage challenge
crossed the start/finish line twice at the 2013 and 2014 I500 on a 78 liquifire 440
Re: liquidator parts
Wade you have been pm'd
-
I500
- Posts: 1264
- Joined: Thu Nov 24, 2005 1:00 am
- Real Name: Chuck Moser
- Location: Wyoming Minnesota
Re: liquidator parts
Wade ... Not really sure what i need. Have so many Dator parts laying around i cant keep track. Need to start putting stuff together...... I enjoy staying one step ahead of Tasky on finding cranks and pipes.... Thats my hobby. 
Re: liquidator parts
this fuel pump bracket looks different than others ive seen , not bent in a 90 is it corrector an updator part of some kind? , also what about the heat shield ? is it a correct part or something someone made . looking to duplicate these parts just want to make sure my samples are good thx wade
- Attachments
-
-
certificate recipiant of the 12 vintage challenge !! on a 78 liquifre 440,
certificate recipiant of the 13 vintage challenge !! on a 340/s
certificate recipient of the 14 vintage challenge !! on a 78 liquifire 440
joe forgot the certificates for the 2015 vintage challenge
crossed the start/finish line twice at the 2013 and 2014 I500 on a 78 liquifire 440
certificate recipiant of the 13 vintage challenge !! on a 340/s
certificate recipient of the 14 vintage challenge !! on a 78 liquifire 440
joe forgot the certificates for the 2015 vintage challenge
crossed the start/finish line twice at the 2013 and 2014 I500 on a 78 liquifire 440
Re: liquidator parts
bump
certificate recipiant of the 12 vintage challenge !! on a 78 liquifre 440,
certificate recipiant of the 13 vintage challenge !! on a 340/s
certificate recipient of the 14 vintage challenge !! on a 78 liquifire 440
joe forgot the certificates for the 2015 vintage challenge
crossed the start/finish line twice at the 2013 and 2014 I500 on a 78 liquifire 440
certificate recipiant of the 13 vintage challenge !! on a 340/s
certificate recipient of the 14 vintage challenge !! on a 78 liquifire 440
joe forgot the certificates for the 2015 vintage challenge
crossed the start/finish line twice at the 2013 and 2014 I500 on a 78 liquifire 440
Re: liquidator parts
The crank case heat shield looks right. Not so sure about the fuel pump bracket I have 2 bent ones and one unaccounted for. I will have a more accurate count for you on these other parts as to what I need after the first of January
Re: liquidator parts
thx bill , did someone make my fuel pump bracket ? it doesnt look like it was staightend ??
certificate recipiant of the 12 vintage challenge !! on a 78 liquifre 440,
certificate recipiant of the 13 vintage challenge !! on a 340/s
certificate recipient of the 14 vintage challenge !! on a 78 liquifire 440
joe forgot the certificates for the 2015 vintage challenge
crossed the start/finish line twice at the 2013 and 2014 I500 on a 78 liquifire 440
certificate recipiant of the 13 vintage challenge !! on a 340/s
certificate recipient of the 14 vintage challenge !! on a 78 liquifire 440
joe forgot the certificates for the 2015 vintage challenge
crossed the start/finish line twice at the 2013 and 2014 I500 on a 78 liquifire 440
Re: liquidator parts
It does not look shop built however, it looks like they just forgot to put a 90 degree bend in it.
-
I500
- Posts: 1264
- Joined: Thu Nov 24, 2005 1:00 am
- Real Name: Chuck Moser
- Location: Wyoming Minnesota
Re: liquidator parts
Chaincase heatshield appears to be correct and the fuel pump bracket is also correct. There are 2 different types of pump brackets. You have the earlier version. The M66866 was the later. Need to see better pics to verify.