Any John Deere Sleds Racing at Eagle River in 2013?

ski · Post by **ski** » Sun Jan 20, 2013 5:12 pm

Just wondered if JD was represented at Eagle River this year? If so, how did they do?

Post by **Matt** » Sun Jan 20, 2013 5:21 pm

I looked through the results on vintagesleds.com and didn't see any.

SnowCrossMark · Post by **SnowCrossMark** » Tue Jan 22, 2013 10:10 am

Hi guys,

I see that our friend Justin Ernst #517 (munkeystew) is shown finishing fifth in the SS 440 Fan final on a Yamaha GPX.
Here are the 2013 SS 440 Results. http://www.derbytrack.com/files/Vintage ... 202013.pdf

However, here is video of the race. http://www.youtube.com/watch?v=pCvlRvaQm6s

vintagesleds.com racing forum discussion of SS 440 Fan race, with Deere comments, and munkeystew
telling his story. http://vintagesleds.com/bs/index.php/topic,76038.0.html

P.S. I was waiting for someone who was there to post JD results.

Pin it and enjoy that magic that is your Deere. - Mark

Horicon Joe · Post by **Horicon Joe** » Tue Jan 22, 2013 1:42 pm

I was there and we were all pulling for that lonesome Deere!

Post by **Matt** » Tue Jan 22, 2013 1:53 pm

Looks like he had his hands full.

Sent from my DROID3 using Tapatalk 2

JDT · Post by **JDT** » Tue Jan 22, 2013 9:38 pm

Little bit of NASCAR action going on out there.

monkeystew · Post by **monkeystew** » Thu Jan 24, 2013 12:06 am

I did race my cyclone at ER. They screwed up on the sled info. This year I easily qualified for the final. The last couple years I've been struggling with the stock primary, and secondary. It is now converted to Polaris clutches,for more tunability. The final was kinda disappointing, I found that a mouse had eaten a big piece of fan belt off. I had gotten a bad start 8th or so, and worked up to 3rd. On th 3rd lap the belt had given up, as the motor got hotter, and slower. I managed 5th. I really believe that it can win, I've gotten numerous heat, wins, and some 2nds in the finals in provintage. This Monday I delivered a spare motor to an well recognized engine builder. I've been running a stock motor so far, so we shall see.........Any help would be very appreciated.....

monkeystew · Post by **monkeystew** » Thu Jan 24, 2013 12:10 am

Anybody have 60 over pistons to sell?????? 440/22 kioritz.

S_Kyle · Post by **S_Kyle** » Thu Jan 24, 2013 1:09 am

I might have a set. I will look and get back to you. I will be at waconia.

monkeystew · Post by **monkeystew** » Fri Jan 25, 2013 9:44 am

I cannot find a 40 over right piston either, anyone out there have one???? I need one asap. Engine builder is waiting....

S_Kyle · Post by **S_Kyle** » Sat Jan 26, 2013 12:18 am

All I could find was a set of 40 over liquifire pistons. Sorry

Any John Deere Sleds Racing at Eagle River in 2013?

Any John Deere Sleds Racing at Eagle River in 2013?

Re: Any John Deere Sleds Racing at Eagle River in 2013?

Re: Any John Deere Sleds Racing at Eagle River in 2013?

Re: Any John Deere Sleds Racing at Eagle River in 2013?

Re: Any John Deere Sleds Racing at Eagle River in 2013?

Re: Any John Deere Sleds Racing at Eagle River in 2013?

Re: Any John Deere Sleds Racing at Eagle River in 2013?

Re: Any John Deere Sleds Racing at Eagle River in 2013?

Re: Any John Deere Sleds Racing at Eagle River in 2013?

Re: Any John Deere Sleds Racing at Eagle River in 2013?

Re: Any John Deere Sleds Racing at Eagle River in 2013?