I thought we were screwed there for a little while!!
Broke clutch puller.
-
fastl82vette
- Posts: 460
- Joined: Wed Mar 13, 2013 8:22 am
- Real Name: Greg Cyrocki
- Location: LaMoille, Il
Broke clutch puller.
Has anyone ever snapped a clutch puller with an impact wrench? Was working on a liquifire with a tr800 and the clutch wouldn't budge. After a little while, the puller snapped!! Luckily after spraying the backside with some WD and a 30 minute wait, we tapped on it with a 2x4 and a hammer and it popped off.
I thought we were screwed there for a little while!!
I thought we were screwed there for a little while!!
-Greg
'82 Sprintfire (original running project) SOLD
'72 400 (original non-running 2nd owner)
'73 400 (original non-running 2nd owner)
'86 Kitty cat
'77 Cyclone SOLD
'78 Spitfire x2 (sold one)(I think I officially have a sickness)
'84 Liquifire #420 "The Last Liquifire" (rescued, SOLD)
'82 Spitfire #2100 "The Last Spitfire"
'83 Sprintfire (wife's sled
)
'84 Snowfire
'88 Yamaha Sno Scoot
'71 Massey Ski Whiz Special
'82 Sprintfire (original running project) SOLD
'72 400 (original non-running 2nd owner)
'73 400 (original non-running 2nd owner)
'86 Kitty cat
'77 Cyclone SOLD
'78 Spitfire x2 (sold one)(I think I officially have a sickness)
'84 Liquifire #420 "The Last Liquifire" (rescued, SOLD)
'82 Spitfire #2100 "The Last Spitfire"
'83 Sprintfire (wife's sled
)'84 Snowfire
'88 Yamaha Sno Scoot
'71 Massey Ski Whiz Special
-
WinnipegStPaul9
- Posts: 5577
- Joined: Sat Jul 23, 2005 12:00 am
- Real Name: Don Amber
- Location: Churubusco, IN
Re: Broke clutch puller.
If it was a genuine "Comet" puller I'm very surprised. If it's not then I'm not surprised at all.
DA
DA
Feel free to check out our website www.buscobullet.com for restorations or parts.
-
fastl82vette
- Posts: 460
- Joined: Wed Mar 13, 2013 8:22 am
- Real Name: Greg Cyrocki
- Location: LaMoille, Il
Re: Broke clutch puller.
I am not sure. My father in law had it in his tool box for years from when he used to work on them.
-Greg
'82 Sprintfire (original running project) SOLD
'72 400 (original non-running 2nd owner)
'73 400 (original non-running 2nd owner)
'86 Kitty cat
'77 Cyclone SOLD
'78 Spitfire x2 (sold one)(I think I officially have a sickness)
'84 Liquifire #420 "The Last Liquifire" (rescued, SOLD)
'82 Spitfire #2100 "The Last Spitfire"
'83 Sprintfire (wife's sled)
'84 Snowfire
'88 Yamaha Sno Scoot
'71 Massey Ski Whiz Special
'82 Sprintfire (original running project) SOLD
'72 400 (original non-running 2nd owner)
'73 400 (original non-running 2nd owner)
'86 Kitty cat
'77 Cyclone SOLD
'78 Spitfire x2 (sold one)(I think I officially have a sickness)
'84 Liquifire #420 "The Last Liquifire" (rescued, SOLD)
'82 Spitfire #2100 "The Last Spitfire"
'83 Sprintfire (wife's sled
)'84 Snowfire
'88 Yamaha Sno Scoot
'71 Massey Ski Whiz Special
-
jdrob
- Posts: 1212
- Joined: Thu Feb 25, 2010 1:23 pm
- Real Name: Rob
- Location: Pennsylvania/OHIO border
Re: Broke clutch puller.
You can still get a genuine Comet puller. :-)
Sent from my SM-N900V using Tapatalk
Sent from my SM-N900V using Tapatalk
Jdrob
"Two things are infinite: the universe and human stupidity; and I'm not sure about the universe." AE
"Two things are infinite: the universe and human stupidity; and I'm not sure about the universe." AE
-
nick80lf
- Posts: 1159
- Joined: Thu Jan 14, 2010 10:45 pm
- Real Name: Nick
- Location: The snow free zone of Ohio
Re: Broke clutch puller.
I loaned out my genuine comet puller. When it found it's way home. It had a very noticible bend.
Sent from my HTC One_M8 using Tapatalk
Sent from my HTC One_M8 using Tapatalk
80 Liquifire (purchased 1996 ~ Running)
80 Liquifire (purchased 2010 ~ Running....Now)
80 Liquifire (purchased 2011 ~ Not running - I officially have a problem now)
83 Snowfire (purchased 2014 father/son restoration project)
78 Spitfire ~ sold (should have been shot for this)
80 Liquifire (purchased 2010 ~ Running....Now)
80 Liquifire (purchased 2011 ~ Not running - I officially have a problem now)
83 Snowfire (purchased 2014 father/son restoration project)
78 Spitfire ~ sold (should have been shot for this)
-
sledder670
- Posts: 697
- Joined: Mon Oct 26, 2009 9:45 pm
- Real Name: Brad Wheelock (wheel)
- Location: rockford, il
Re: Broke clutch puller.
I had a guy bring me a 2009 skidoo 800 with one busted off. He had a roller arm broke in the clutch and then a bigger problem. I never got it out or off not sure what happened to it.
I buy sell and service all brands. Contact me and i might be able to help. sleds 2-liquidators, 75 340/S, 80 liquifire, 78 440 liquifire, 75 jd 300, 83 9700 skidoo blizzard, 86 skidoo formula plus, 79 motoski super sonic, 91 skidoo mach 1 x, 92 formula plus x, 95 mxz 440, 3 toni hiakonen edition mxz's, 98 mxzx, 97 mxzx, 77 skidoo rv cross coutry, 77 skidoo Rv 340, 75 skidoo tnt 340FA, 97skidoo formula3LT, 06 800 skidoo summit, 08 skidoo tnt full trail mod with nos
-
fastl82vette
- Posts: 460
- Joined: Wed Mar 13, 2013 8:22 am
- Real Name: Greg Cyrocki
- Location: LaMoille, Il
Re: Broke clutch puller.
That would suck!! I believe we were lucky that this one came off.
- Attachments
-
-Greg
'82 Sprintfire (original running project) SOLD
'72 400 (original non-running 2nd owner)
'73 400 (original non-running 2nd owner)
'86 Kitty cat
'77 Cyclone SOLD
'78 Spitfire x2 (sold one)(I think I officially have a sickness)
'84 Liquifire #420 "The Last Liquifire" (rescued, SOLD)
'82 Spitfire #2100 "The Last Spitfire"
'83 Sprintfire (wife's sled)
'84 Snowfire
'88 Yamaha Sno Scoot
'71 Massey Ski Whiz Special
'82 Sprintfire (original running project) SOLD
'72 400 (original non-running 2nd owner)
'73 400 (original non-running 2nd owner)
'86 Kitty cat
'77 Cyclone SOLD
'78 Spitfire x2 (sold one)(I think I officially have a sickness)
'84 Liquifire #420 "The Last Liquifire" (rescued, SOLD)
'82 Spitfire #2100 "The Last Spitfire"
'83 Sprintfire (wife's sled
)'84 Snowfire
'88 Yamaha Sno Scoot
'71 Massey Ski Whiz Special
-
jdrob
- Posts: 1212
- Joined: Thu Feb 25, 2010 1:23 pm
- Real Name: Rob
- Location: Pennsylvania/OHIO border
Re: Broke clutch puller.
Dang Greg you using a 3/4 " impact on that thing? Lol.
Sent from my SM-N900V using Tapatalk
Sent from my SM-N900V using Tapatalk
Jdrob
"Two things are infinite: the universe and human stupidity; and I'm not sure about the universe." AE
"Two things are infinite: the universe and human stupidity; and I'm not sure about the universe." AE
-
fastl82vette
- Posts: 460
- Joined: Wed Mar 13, 2013 8:22 am
- Real Name: Greg Cyrocki
- Location: LaMoille, Il
Re: Broke clutch puller.
No, a badass 1/2" IR
-Greg
'82 Sprintfire (original running project) SOLD
'72 400 (original non-running 2nd owner)
'73 400 (original non-running 2nd owner)
'86 Kitty cat
'77 Cyclone SOLD
'78 Spitfire x2 (sold one)(I think I officially have a sickness)
'84 Liquifire #420 "The Last Liquifire" (rescued, SOLD)
'82 Spitfire #2100 "The Last Spitfire"
'83 Sprintfire (wife's sled)
'84 Snowfire
'88 Yamaha Sno Scoot
'71 Massey Ski Whiz Special
'82 Sprintfire (original running project) SOLD
'72 400 (original non-running 2nd owner)
'73 400 (original non-running 2nd owner)
'86 Kitty cat
'77 Cyclone SOLD
'78 Spitfire x2 (sold one)(I think I officially have a sickness)
'84 Liquifire #420 "The Last Liquifire" (rescued, SOLD)
'82 Spitfire #2100 "The Last Spitfire"
'83 Sprintfire (wife's sled
)'84 Snowfire
'88 Yamaha Sno Scoot
'71 Massey Ski Whiz Special
Re: Broke clutch puller.
I picked up one of the clutch holder tools. Then use a 1/2" breaker bar with a cheater bar.
I found this method works really well.
Then the clutch holder works when installing the primary to get the correct intallation torque.
But looking at that bent puller...Im surprised the threads didnt get pulled out of the clutch.
I found this method works really well.
Then the clutch holder works when installing the primary to get the correct intallation torque.
But looking at that bent puller...Im surprised the threads didnt get pulled out of the clutch.
Eric A.
"Life is tough, but it's tougher when you're stupid" - John Wayne
"Life is tough, but it's tougher when you're stupid" - John Wayne
-
klonteig
- Posts: 43
- Joined: Sat Oct 20, 2012 10:26 pm
- Real Name: Jordan Klonteig
- Location: Chatham, Ontario
Re: Broke clutch puller.
I stripped the threads off a similar clutch puller trying to get a Sal off a 300. That was just using a big breaker and a cheater as it was out in the shed where I couldn't get at it with an impact. Next step will be to try and get the cover off to see if any of the springs and cams are salvageable. Fixed sheave is most certainly not!
Jordan
-----------------
1-1/2 JD300E's
-----------------
-----------------
1-1/2 JD300E's
-----------------
Re: Broke clutch puller.
In my experience, grease down the hole works best for stubborn clutches that don't want to come off. Pump some grease down the hole, put your puller or a bolt in, and crank away. They pop off every time. No need for an impact or hammers. Hydraulic action at its best.