'80 liquifire clutch questions...

Waterboy7 · Post by **Waterboy7** » Tue Jan 13, 2015 11:46 am

Hello everyone! Just curious what I should do to finish up rebuilding the clutch that came off the '80 LF. I have everything done but now I need new rollers, pins, washers and the plastic bushings.. Can anyone tell me what to get for this clutch? It has a john Deere symbol stamped on the face plate, but it's made by comet, right? And is the model usually 102-c? If anyone could tell me where to find the parts would be awesome!

AirborneX4Special · Post by **AirborneX4Special** » Tue Jan 13, 2015 1:29 pm

Certified Parts Corporation, Janesville WI.

nick80lf · Post by **nick80lf** » Tue Jan 13, 2015 7:03 pm

Roller kit is 207756A

Sent from my HTC One_M8 using Tapatalk

JoeRainville · Post by **JoeRainville** » Tue Jan 13, 2015 7:36 pm

Waterboy7,

Yes, your clutch is a Comet 102-C. Now that CPC is making new Comet's, parts for the 102-C should not be hard to find. You can buy direct from CPC as mentioned above, or other places like Dennis Kirk or Whal Bros. Racing. The only part this is hard to find are the original B-1 arms, but some of the guys have had good luck using newer arms on the Liquifire.

Good luck,
-Joe

Waterboy7 · Post by **Waterboy7** » Thu Jan 15, 2015 9:45 am

Thanks guys!! :letitsnow:

69camaro · Post by **69camaro** » Thu Jan 15, 2015 10:11 am

It looks like you are coming along nice.

'80 liquifire clutch questions...

'80 liquifire clutch questions...

Re: '80 liquifire clutch questions...

Re: '80 liquifire clutch questions...

Re: '80 liquifire clutch questions...

Re: '80 liquifire clutch questions...

Re: '80 liquifire clutch questions...