Wtb: comet spider tool

largecar04 · Post by **largecar04** » Fri Jan 16, 2015 8:32 pm

Anybody got the spider tools 219795a and 215723a they want to part with? Or does anyone recommend the tapered half tool 213965a instead of the base block?

Post by **Norton** » Sat Jan 17, 2015 11:25 am

I have been using a bad crank pto end with clutch bolt, in the vice. The Spider tool from Dennis Kirk. DK also sells the Sno Stuff vice holding portion.

Matt's parts here are my first choice but I have had, not perfect but good success buying older sled parts and tools from DK in the past. Great web site and speedy delivery.

kb

Post by **WinnipegStPaul9** » Sat Jan 17, 2015 1:30 pm

I like everything I've purchased from this source BUT the secret is a real good 6" (at least) vice.
http://www.mfgsupply.com/snowmobile/sno ... tmisc.html

DA

JDGuy · Post by **JDGuy** » Sat Jan 17, 2015 11:13 pm

The tapered tool works good for me. Just need to hold it from turning. I welded a 3/4 drive socket to a piece of angle iron to keep it from turning in vise

harleysportster · Post by **harleysportster** » Sun Jan 18, 2015 1:25 am

I have the same tool, I just tighten it in the vise as is.

monte44 · Post by **monte44** » Sun Jan 18, 2015 11:35 am

I ordered mine form high performance engineering. Works great!

largecar04 · Post by **largecar04** » Mon Jan 19, 2015 12:58 am

Good to know! Thanks for the input guys. I'm placing an order tonight.

Wtb: comet spider tool

Wtb: comet spider tool

Re: Wtb: comet spider tool

Re: Wtb: comet spider tool

Re: Wtb: comet spider tool

Re: Wtb: comet spider tool

Re: Wtb: comet spider tool

Re: Wtb: comet spider tool