TR-800 Bushings

Post by **Matt** » Tue Oct 07, 2014 9:00 pm

Thanks to some leg-work from Tom White, Certified Parts Corp/CPC (owner of Comet) is willing to reproduce the bushings for the TR800 clutch, both the movable face and cover bushings. As far as pricing, we're in the ballpark of $30/bushing, hopefully a little less.

Please reply if you are interested in bushings - which one and how many of each you would like.

JoeRainville · Post by **JoeRainville** » Wed Oct 08, 2014 7:18 pm

Matt, I can use 4 moveable face bushings and maybe a cover one or two...
-Joe

Farmer · Post by **Farmer** » Thu Oct 09, 2014 10:44 pm

I would take 2 of each.

ihengineer76 · Post by **ihengineer76** » Fri Oct 10, 2014 8:11 am

I would take one of each.

Post by **Matt** » Wed Oct 29, 2014 7:10 am

Update - things are moving forward, and the price is looking like $45 per set (1 movable and 1 cover bushing). I will update with a ETA.

JoeRainville · Post by **JoeRainville** » Fri Oct 31, 2014 12:41 pm

Matt,

Great timing, as my 84 resto is moving along and I eventually need new bushings for the TR-800. I am in for several sets once they are available.

Thanks!
-Joe

Post by **Matt** » Sun Nov 02, 2014 2:38 pm

The order for the bushings has been placed, and they're saying 4-6 weeks.

skoalmint · Post by **skoalmint** » Sun Nov 02, 2014 7:45 pm

Hey Matt , I will take 3 sets. Thanks Brock

largecar04 · Post by **largecar04** » Wed Nov 05, 2014 12:53 am

I would like a set please.

Post by **Matt** » Thu Jan 22, 2015 6:21 pm

These bushing will be ready early February because of a production delay. I thought we had got an early enough start get them in before winter, but of course not...

69camaro · Post by **69camaro** » Fri Jan 23, 2015 12:43 am

I know I'm going to need some too. I have not taken the time to find out how many yet.

snowfire1 · Post by **snowfire1** » Sat Jan 24, 2015 2:44 pm

I would like 4 sets.

Chuck

Jimmy · Post by **Jimmy** » Tue Jan 27, 2015 10:32 am

I will take 4 sets.

jimmy

Post by **Matt** » Thu Feb 12, 2015 8:55 pm

The TR800 Bushings have arrived at CPC so I should have them here next week.

JoeRainville · Post by **JoeRainville** » Thu Feb 12, 2015 11:26 pm

Great news Matt. I am looking forward to getting a few sets to support my 84 Liquifire resto and 82 runner.

It was good to see you and Pat at the HOF too.

-Joe

TR-800 Bushings

TR-800 Bushings

Re: TR-800 Bushings

Re: TR-800 Bushings

Re: TR-800 Bushings

Re: TR-800 Bushings

Re: TR-800 Bushings

Re: TR-800 Bushings

Re: TR-800 Bushings

Re: TR-800 Bushings

Re: TR-800 Bushings

Re: TR-800 Bushings

Re: TR-800 Bushings

Re: TR-800 Bushings

Re: TR-800 Bushings

Re: TR-800 Bushings