Console Model Plates

fastl82vette · Post by **fastl82vette** » Fri Jan 30, 2015 3:54 pm

This is on my '72 400
It is on the engine shroud, not the top cover.

JDT · Post by **JDT** » Fri Jan 30, 2015 4:00 pm

It would appear that the 72 emblem is larger than the later years.

Never owned a 72 myself.

ljm · Post by **ljm** » Sat Jan 31, 2015 1:23 pm

I checked all my mid mounts

My 74 600 has the multiple lines of John Deere on the cover. Nothing on the console
My 72 400 is the same as already posted
My 75 and newer are the same as the others posted.

I'll try and shrink the pics so I can post them

ddub · Post by **ddub** » Sun Feb 01, 2015 12:28 am

Can someone get me measurements on the 72 plate? That looks like the one that came off of my 73, if it is, I thing we might have this about figured out.

Thanks for the help guys.

Post by **Matt** » Sun Feb 01, 2015 8:41 am

ljm wrote:I checked all my mid mounts
My 74 600 has the multiple lines of John Deere on the cover. Nothing on the console

I wonder if your cover had been swapped with one of the '73 replacement ones, because there seems to be a specific 600 plate for '74. friendlyfarmeria posted it above and I have one here somewhere too.

ljm · Post by **ljm** » Sun Feb 01, 2015 9:10 pm

That is possible.
All of mine have the cc rounded off 400's say 340, 300's say 300 and 800 says 440. My 600 just says john deere on the cover and nothing on the console

fastl82vette · Post by **fastl82vette** » Sun Feb 01, 2015 9:53 pm

The 72 that I posted is 4 3/4 x 3/4"
My 73 400 has John deere
John deere
John deere

fastl82vette · Post by **fastl82vette** » Sun Feb 01, 2015 9:57 pm

This one

ddub · Post by **ddub** » Tue Feb 03, 2015 2:23 pm

Well we measured my "73" plate and came up with this.

The measurement is 4 3/4 by like 23/32 which is just short of 3/4.

So, I am going to say, this is the same as a 72.

I am going to put together a preliminary list for review after I get back from Live On Ski's. If we are in agreement on the content of the plates, I will start moving forward again.

ddub · Post by **ddub** » Wed Feb 18, 2015 3:45 pm

Here is a listing of what I have compile for your guys to review before we start creating graphic files. Sorry, the formatting was somewhat lost coming from a spreadsheet.

Basically, I have the year, model, and the cc rating.

300-800 Series
4 3/4 by 23/32 Rectangular Crest Notes
Year Model CC Rating
1972-1973 400 339
1972-1973 500 436
1973 600 436

Square Crest
1973 All Replacement Multi Line John Deere
1974 300 292
1974 400 339
1974 500 436
1974 600 436

Tapered Crest
1975 300 300
1975-1977 400 340
1975 600 440
1975 800 440

JDX Seriecs
Tapered Crest
1973-1975 JDX-4 340
1974-1975 JDX-6 400
1973-1975 JDX-8 440

Please let me know if you guys see some errors or missing model plates.

lwb140 · Post by **lwb140** » Wed Feb 18, 2015 11:23 pm

295? wade

ddub · Post by **ddub** » Thu Feb 19, 2015 10:36 pm

lwb140 wrote:295? wade

What year model said 295? My 74 300 says 292.

There is also a question that has been posed to me as to which size/design did the early JDX sleds use?

Thanks!

Horicon Joe · Post by **Horicon Joe** » Thu Feb 19, 2015 11:20 pm

Ddub....... If you don't mind me asking. .... what is your name?

Joe

lwb140 · Post by **lwb140** » Fri Feb 20, 2015 12:00 am

wade thinking about the 74 295/s , think you have it covered with the johndeere x5 one thx wade

Console Model Plates

Re: Console Model Plates

Re: Console Model Plates

Re: Console Model Plates

Re: Console Model Plates

Re: Console Model Plates

Re: Console Model Plates

Re: Console Model Plates

Re: Console Model Plates

Re: Console Model Plates

Re: Console Model Plates

Re: Console Model Plates

Re: Console Model Plates

Re: Console Model Plates

Re: Console Model Plates