Trailfire Parts

70WT1 · Post by **70WT1** » Mon Jan 19, 2015 12:11 pm

Let me know if you see something you need and make me an offer

70WT1 · Post by **70WT1** » Mon Jan 19, 2015 12:11 pm

liquifireguy · Post by **liquifireguy** » Mon Jan 19, 2015 1:33 pm

I am looking for a nice, straight shaft that goes from the secondary clutch to the chaincase for an 82 340. Also looking for an excellent track for it. The 82 and up tracks are half inch wider than pre 82.

70WT1 · Post by **70WT1** » Mon Jan 19, 2015 3:08 pm

What is the jack shaft length that you need? My only good track is in my 84

liquifireguy · Post by **liquifireguy** » Mon Jan 19, 2015 10:30 pm

According to the parts manual, all Trailfires used the same jackshaft. I don't have mine apart to be able to measure. I bought the sled for my wife to use and it works fine, but just has a little more vibration than I like. Somehow, the jackshaft got bent a little because I can see the end that the secondary clutch is on has a little wobble. Jeff

Post by **WinnipegStPaul9** » Tue Jan 20, 2015 7:47 am

Jeff, we probably have a jackshaft for you.

DA

deerehunting · Post by **deerehunting** » Wed Feb 04, 2015 9:17 pm

If that's a 440 do you have the pto side cylinder and head?

70WT1 · Post by **70WT1** » Wed Feb 04, 2015 11:04 pm

Yes 440, I should have Matt I'll pull it off and make sure I have a good one .

deerehunting · Post by **deerehunting** » Thu Feb 05, 2015 12:32 am

ok thanks pm me if so. Not sure if it matters but mine is a 1980

jdrob · Post by **jdrob** » Thu Feb 05, 2015 2:48 am

Larry the complete engine you have sitting there is not s trailfire engine. Its a drifter 440 or a sportfire 440. Depending on the intake. I might be interested in that if its not sold? Always looking for sporty engine parts. Lmk

Sent from my SM-N900V using Tapatalk

jdrob · Post by **jdrob** » Thu Feb 05, 2015 2:56 am

Jeff let me look through my track and see what i have.

Sent from my SM-N900V using Tapatalk

70WT1 · Post by **70WT1** » Thu Feb 05, 2015 8:20 am

You're right Rob its a Sportfire engine, I have another Trailfire motor to check also.

liquifireguy · Post by **liquifireguy** » Thu Feb 05, 2015 10:36 am

Rob, If you have a nice 82+ track, I am very interested. Just send me a pm. Thanks, Jeff

jdrob · Post by **jdrob** » Thu Feb 05, 2015 1:57 pm

Larry can you see in the ports of the cylinders for any scoring or markings in the chrome and how does it feel turning over? (That sporty block ) ??

Sent from my SM-N900V using Tapatalk

johndeere120 · Post by **johndeere120** » Sat Feb 07, 2015 3:35 pm

larry if you still have the flywheel with the ring gear pm me a price thanks

Trailfire Parts

Trailfire Parts

Re: Trailfire Parts

Re: Trailfire Parts

Re: Trailfire Parts

Re: Trailfire Parts

Re: Trailfire Parts

Re: Trailfire Parts

Re: Trailfire Parts

Re: Trailfire Parts

Re: Trailfire Parts

Re: Trailfire Parts

Re: Trailfire Parts

Re: Trailfire Parts

Re: Trailfire Parts

Re: Trailfire Parts