guys, i have a 78 cyclone that spit the hyfax out the back because the little nut tab
that was tig welded to the rail broke off. Short of pulling the skid and fabbing some
new pieces, has anyone drilled and tapped the front of the rail and held the fax
on with a screw? Not sure if there is enough beef there. Any thoughts?
cyclone hyfax
- 400brian
- Posts: 5620
- Joined: Wed Jul 20, 2005 12:00 am
- Real Name: James T. Kirk
- Location: South Central Wisconsin
Re: cyclone hyfax
I've got a '78 suspension, that the previous owner drilled 1/4" holes through the front of the rails, so 1/4 bolts could be installed to retain the slides. I can't say I really reccommend it, but I can say I've seen it.
'09 Vintage Challenge Survivor, and I wasn't late for supper!
'10, '11, '12, '13,'14,'15,'16,'17, '18, 19, 20, 21, 22 Vintage Challenge Survivor !
72 400 restored, Father bought new in '71
73 X8 restored
'74 340 green machine
'74 X8 9 time VC finisher
'78 Spitfire in progress
2 '75 340S 1 running, one on deck
'78 LF 440 future CC clone
'73 Skiroule RTX 440, 500 mi.
-
- Posts: 4747
- Joined: Wed Jul 13, 2005 12:00 am
- Real Name: Matt
- Location: Coopersburg, PA
- Contact:
Re: cyclone hyfax
Other brands do this normally (maybe some JDs too) and the new hyfax even have holes pre-drilled to use a bolt on the front of the slide/skid to hold it.
Matt - JDsleds.com Administrator
- jdrob
- Posts: 1212
- Joined: Thu Feb 25, 2010 1:23 pm
- Real Name: Rob
- Location: Pennsylvania/OHIO border
Re: cyclone hyfax
That hole in the hyfax Matt is for the mid-mount sleds. They have a bolt in the front of the slide rail. At least on a 74' X6 did.. :-) Not sure how cyclone/liquifire years are? Fire series are bolts in the back with keeper.
Sent from my SM-N900V using Tapatalk
Sent from my SM-N900V using Tapatalk
Jdrob
"Two things are infinite: the universe and human stupidity; and I'm not sure about the universe." AE
"Two things are infinite: the universe and human stupidity; and I'm not sure about the universe." AE
Re: cyclone hyfax
Dator heavys and 340/s are that way also 76-77 too I think Wade
certificate recipiant of the 12 vintage challenge !! on a 78 liquifre 440,
certificate recipiant of the 13 vintage challenge !! on a 340/s
certificate recipient of the 14 vintage challenge !! on a 78 liquifire 440
joe forgot the certificates for the 2015 vintage challenge
crossed the start/finish line twice at the 2013 and 2014 I500 on a 78 liquifire 440
certificate recipiant of the 13 vintage challenge !! on a 340/s
certificate recipient of the 14 vintage challenge !! on a 78 liquifire 440
joe forgot the certificates for the 2015 vintage challenge
crossed the start/finish line twice at the 2013 and 2014 I500 on a 78 liquifire 440
-
- Posts: 2965
- Joined: Thu Jul 14, 2005 12:00 am
- Real Name: Pat Scott
- Location: Southeast Pa.
Re: cyclone hyfax
76/77 cyclone/liquifire with the steel rails had a hole drilled in the front of the rail to anchor the hyfax to.
'76 440 cyclone
'76 440 liquifire
'78 440 Cyclone
'75 JDX8 (sold to a member here)
'78 Liquifire(CrossCountry Clone)
'80 Liquifire(sold)
'76 440 liquifire
'78 440 Cyclone
'75 JDX8 (sold to a member here)
'78 Liquifire(CrossCountry Clone)
'80 Liquifire(sold)
-
- Posts: 19
- Joined: Tue Feb 05, 2013 3:38 pm
- Location: Western Mass
Re: cyclone hyfax
All my Cyclones/Gen I Liquifires use a bolt in the front.
1976 Cyclone 340
1976 Cyclone 440
1977 Cyclone 340
1978 Cyclone 440
1980 Liquifire x 2
1981 Sportfire
1983 Snowfire
1983 Sprintfire (runs/looks awesome!!)
1983 Trailfire LX x 2
1978 Kawi Intriguer
1976 Cyclone 440
1977 Cyclone 340
1978 Cyclone 440
1980 Liquifire x 2
1981 Sportfire
1983 Snowfire
1983 Sprintfire (runs/looks awesome!!)
1983 Trailfire LX x 2
1978 Kawi Intriguer
Re: cyclone hyfax
is the 78 the only skid that was aluminum with the tab in the rear to hold
the hyfax?
the hyfax?
-
- Posts: 2965
- Joined: Thu Jul 14, 2005 12:00 am
- Real Name: Pat Scott
- Location: Southeast Pa.
Re: cyclone hyfax
The switch from front to back started in 1978. All the skid rails from then on are aluminum.
'76 440 cyclone
'76 440 liquifire
'78 440 Cyclone
'75 JDX8 (sold to a member here)
'78 Liquifire(CrossCountry Clone)
'80 Liquifire(sold)
'76 440 liquifire
'78 440 Cyclone
'75 JDX8 (sold to a member here)
'78 Liquifire(CrossCountry Clone)
'80 Liquifire(sold)