ski spreaders

big jeff · Post by **big jeff** » Sun Mar 08, 2015 4:38 pm

ok I finely got out with my 76 300 runs great BUT its very tippy, my buddy suggested ski spreaders. I've read a lot of post some say they are good some say bad . Has any one used them on a 300 and how well did they work?

Thanks Jeff

JDT · Post by **JDT** » Sun Mar 08, 2015 8:17 pm

Spreaders work good... butt...

If you wish to ride agressivly and judge the succuess of your day on how much air you get under you machine maybe you best not get them.

They do move the transitional force vectors to angles that spindles do not like nor tollerate when pushed to the limits.

But they can get you up to 6"of additional width and taken in moderation produce a more pleasurable riding experience.

big jeff · Post by **big jeff** » Tue Mar 10, 2015 7:28 pm

thanks Todd do I need to change the shock mount

JDT · Post by **JDT** » Tue Mar 10, 2015 8:55 pm

You may find that turning the shock end for end allows clearence with spreaders installed.

big jeff · Post by **big jeff** » Fri Mar 13, 2015 12:06 pm

Thanks Todd if any one has photos of this install Id love it

JDT · Post by **JDT** » Fri Mar 13, 2015 9:00 pm

You will need longer upper mounting bolts and some spacers too.

air mechanic · Post by **air mechanic** » Tue Mar 17, 2015 7:58 pm

My father put some on his 74 JD 300 back in the day,like after or within the first year of owning it. Worked well for us. I should pull the old girl out of the garage at the cabin and go over her,has a bad condencer and would need to be completely gone over. Has not been run in 7-8 years. Still looks good,been stored inside most of its life.

Steven · Post by **Steven** » Tue Mar 17, 2015 8:49 pm

I was at a friends a couple weeks ago and he had a moto ski "mirage 2" sitting in the shop and I noticed the spindle and saddle bracket were designed wider. I'm not sure about the spindle measurments but i would like to try it. Heres a pic of some off ebay. Not as wide as the spreaders but stronger. Maybe it could be made to work? Just a thought.

: ImageUploadedByTapatalk1426639256.444038.jpg (86.1 KiB) Viewed 954 times

: ImageUploadedByTapatalk1426639256.444038.jpg (86.1 KiB) Viewed 954 times

JDT · Post by **JDT** » Wed Mar 18, 2015 7:30 am

The offset type spindles from the Moto-Ski are very similar to what Yamaha used for many years.

You will find out that the spindle length is way too short to use on a Deere however.

Spreaders work. I have installed dozens of sets on vintage sleds of various colors.

lwb140 · Post by **lwb140** » Sun Mar 22, 2015 5:33 pm

ive got a set of ski spreaders for sale if anyone is interested wade

big jeff · Post by **big jeff** » Wed Mar 25, 2015 11:43 am

thanks Wade could you send me a pm with price and photo Jeff

ski spreaders

ski spreaders

Re: ski spreaders

Re: ski spreaders

Re: ski spreaders

Re: ski spreaders

Re: ski spreaders

Re: ski spreaders

Re: ski spreaders

Re: ski spreaders

Re: ski spreaders

Re: ski spreaders