I am desperately trying to find a comet clutch puller for my 102 clutch on my 79 trailfire and 80 Liquifire. I need to change the crank seals on my trailfire and I need to get the clutch off. I have been looking online and can't seem to find one. Anyone have one I can buy? Or even loan to me just to get the clutches off? Would be greatly appreciated... Thanks..
Email:motto@firstcoop.com
Cell:7128981121
Comet clutch puller please!!
-
1982LiquFire440
- Posts: 40
- Joined: Tue Sep 13, 2011 9:45 pm
- Real Name: Matt otto
- Location: Lawton, Iowa
-
AirborneX4Special
- Posts: 1450
- Joined: Sat Jan 30, 2010 10:54 am
- Real Name: Pat
- Location: N. IL
Re: Comet clutch puller please!!
A fine threaded 3/4" bolt and a 3/8 bolt with the head cut off can be made to work.
You have to do some measuring to get the correct length.
This is a pic of what I used. The 3/4" was the jack bolt from a steering wheel puller. The 3/8 grade 8 bolt with the head cut off was the slug to bottom out in the crank.
You have to do some measuring to get the correct length.
This is a pic of what I used. The 3/4" was the jack bolt from a steering wheel puller. The 3/8 grade 8 bolt with the head cut off was the slug to bottom out in the crank.
-
1982LiquFire440
- Posts: 40
- Joined: Tue Sep 13, 2011 9:45 pm
- Real Name: Matt otto
- Location: Lawton, Iowa
Re: Comet clutch puller please!!
Thanks for the help, got resoursful and built my own today and got it off. Thanks for the help
Re: Comet clutch puller please!!
Good to hear!