jdx4

Technical topics related to machines powered by Kioritz/CCW & Kohler motors.
Post Reply
krazinite2003
Posts: 29
Joined: Wed Nov 09, 2005 1:00 am
Location: regina saskatchewan canada
Contact:

jdx4

Post by krazinite2003 »

;) hey guys and gals i just bought a 75 jdx4 it was in pieces some what, i have put it back together but i have some things that i dont know how or where they go like the choke mounting i have it in the dash but how dose it held at carb end , how dose the fuel line run from the tank to the carb ? i guess what i need is some pics so i can see where and how to do this right any info would be nice thanx i think i like my 76 lf better i may sell this sled lol not sure yet
Matt
Posts: 4747
Joined: Wed Jul 13, 2005 12:00 am
Real Name: Matt
Location: Coopersburg, PA
Contact:

jdx4

Post by Matt »

There is a bracket that is attached to the top of the carb that the choke cable and throttle cable mounts to. The fuel lines go out of the tank, underneath the bumper support, down the side of the belly pan, then up under the recoil, then to the carb.
:usa: Matt - JDsleds.com Administrator
krazinite2003
Posts: 29
Joined: Wed Nov 09, 2005 1:00 am
Location: regina saskatchewan canada
Contact:

jdx4

Post by krazinite2003 »

thanx matt i will see if i can get that choke cable on how is it held on to that bracket two nuts or something and in your opion is this sled one of those hard to find ones "nothing special about it "
Matt
Posts: 4747
Joined: Wed Jul 13, 2005 12:00 am
Real Name: Matt
Location: Coopersburg, PA
Contact:

jdx4

Post by Matt »

Yes, there are supposed to be 2 jam nuts on the threads at the end. This sled is pretty uncommon, but not very sought after.
:usa: Matt - JDsleds.com Administrator
Post Reply