Compression Spec needed

Technical topics related to machines powered by Kioritz/CCW & Kohler motors.
Post Reply
User avatar
Danzig
Posts: 4431
Joined: Wed Aug 17, 2005 12:00 am
Real Name: Paul File
Location: Van Orin, Illinois

Compression Spec needed

Post by Danzig »

How many lbs. of compression should a 1973 KEC440/21 have? What is the compression ratio also?
1973 JDX8
1978 Liquifire 340
1980 Liquifire 440 CC Racer
1980 Liquifire 440
1982 Liquifire 440


"Gotta Lick It Before You Stick It"
ICCSF 108
Posts: 4369
Joined: Sun Jul 17, 2005 12:00 am
Real Name: Kenny Heins, AKA Grumpy
Location: Blue Springs Mo.
Contact:

Compression Spec needed

Post by ICCSF 108 »

The Veriance between your 2 cylinders as stated above, "no more than 10 psi variance between the cylinders" is a lot more important than what your compression is (as the PSI between the quality of compression gauges used will very dramatically)

Ken
AKA: Kenny, Grumpy, Mr. Richard Head
"I Hunt For it, Purchase it, Haul it, Sometimes Repair it, Sometimes Break it, Then Fix it Again, Label it, Warehouse it, Talk About it, So NOW, HOW Can I Take Any Less $$ For It?"
"God I love the smell of KLOTZ in the morning, That smell, you know that Gasoline/Oil Smell, MAKES the whole place SMELL like.. LIKE VICTORY. You know someday the 2 strokers are gonna end..."
Do Anti-War Protesters have reunions? If so what do they TALK about?
User avatar
Danzig
Posts: 4431
Joined: Wed Aug 17, 2005 12:00 am
Real Name: Paul File
Location: Van Orin, Illinois

Compression Spec needed

Post by Danzig »

The left side is at 190 first check and the right side on first check was 200.

The left side on second check was 180 and the right side was 195, I am sure some fuel started effecting this check once it got in the cylinders.

So how does this sound?
1973 JDX8
1978 Liquifire 340
1980 Liquifire 440 CC Racer
1980 Liquifire 440
1982 Liquifire 440


"Gotta Lick It Before You Stick It"
User avatar
Danzig
Posts: 4431
Joined: Wed Aug 17, 2005 12:00 am
Real Name: Paul File
Location: Van Orin, Illinois

Compression Spec needed

Post by Danzig »

This test was performed with the electric start, not pulling it over by hand.
1973 JDX8
1978 Liquifire 340
1980 Liquifire 440 CC Racer
1980 Liquifire 440
1982 Liquifire 440


"Gotta Lick It Before You Stick It"
liquifire_freak
Posts: 151
Joined: Wed Dec 28, 2005 1:00 am

Compression Spec needed

Post by liquifire_freak »

the sled should have about 125lbs to a high 130lbs
Post Reply