carb trouble trailfire 440 lx

hardware440 · Post by **hardware440** » Fri Nov 07, 2008 9:34 am

need some help with my carb about jet sizes to start my needle and seat says 1.5 my main jet says and it looks to be a 190 .are these correct or has some one played with my jets . i need a base to start at. i looked it up and it says 230 main . any info were or were you guys up here start yours at would help.carb needs good cleaning but want to replace jets and seat . so would like a base setting if possible thank oh ya is a 82 trailfire 440 lx .also what was the factory pilot jet size

Deere Daze · Post by **Deere Daze** » Fri Nov 07, 2008 2:41 pm

Hope this helps out.

Attachments:

trailfire_lx_carb.jpg (109.19 KB)

hardware440 · Post by **hardware440** » Fri Nov 07, 2008 3:41 pm

thanks it does

webman · Post by **webman** » Fri Nov 07, 2008 4:08 pm

Here is the recommendation from the manual