Walboro wont pull fuel

milkman · Post by **milkman** » Fri Jan 23, 2009 5:40 am

Rebuilt recently, needle is not stuck.... any suggestions??

I searched the FAQ and found no answere already..

Mike

Post by **Matt** » Fri Jan 23, 2009 8:35 am

Is the impulse line good? (No cracks, leaks etc) and is there a new screen/check valve on the intake line in the fuel tank? Otherwise, if you put a new carb kit in, it may be together incorrectly.

deereoftheyear · Post by **deereoftheyear** » Fri Jan 23, 2009 1:07 pm

make sure the pickup is good in the tank, I had a 400 that i rebuilt the carb on and it still wouldn't run, and here the pickup had fallen off in the tank the whole time. uke