295/s motor parts

Topics related to the 295/S, 340/S, Liquidator, and Cross Country
Post Reply
Vector Boy
Posts: 3
Joined: Sun Mar 08, 2009 1:00 am
Location: New Ulm Mn.

295/s motor parts

Post by Vector Boy »

hello, i'm new here and looking for help in locating crank seals and gaskets and maybe piston and rings for two 295/S 's that I am restoring. I have three motors (one is parts) for two sleds. for now would like to get one running and driveable for 2010 waconia Mn. event.
ICCSF 108
Posts: 4369
Joined: Sun Jul 17, 2005 12:00 am
Real Name: Kenny Heins, AKA Grumpy
Location: Blue Springs Mo.
Contact:

295/s motor parts

Post by ICCSF 108 »

Gaskets can be purchased from Windosa, Cometic or other parts suppliers, Seals can also be purchased, the size of the seals should be stamped on the seal ( it should read like 25-62-10 or whatever ) I believe on the 295/S there are 2 different sized seals, so you need to look at both, also if the cranks has been sitting for a bunch of years it would be a good Idea to send them out & have the bearings cked & the center seals replaced.. we have a crank place as one of the sponsors of this website CRANKSHAFT SERVICES..

Kenny
AKA: Kenny, Grumpy, Mr. Richard Head
"I Hunt For it, Purchase it, Haul it, Sometimes Repair it, Sometimes Break it, Then Fix it Again, Label it, Warehouse it, Talk About it, So NOW, HOW Can I Take Any Less $$ For It?"
"God I love the smell of KLOTZ in the morning, That smell, you know that Gasoline/Oil Smell, MAKES the whole place SMELL like.. LIKE VICTORY. You know someday the 2 strokers are gonna end..."
Do Anti-War Protesters have reunions? If so what do they TALK about?
Post Reply