Make A Wish Project 340/S kickoff

General topics related to John Deere Snowmobiles
Post Reply
Matt
Posts: 4747
Joined: Wed Jul 13, 2005 12:00 am
Real Name: Matt
Location: Coopersburg, PA
Contact:

Re: Make A Wish Project 340/S kickoff

Post by Matt »

Jerome is a bit slow to respond to e-mail, phone is the better way to reach him. 320-267-8801.
:usa: Matt - JDsleds.com Administrator
clackinator
Posts: 122
Joined: Tue Dec 02, 2008 1:00 am
Location: Menahga, Minn.

Re: Make A Wish Project 340/S kickoff

Post by clackinator »

Thanks! I'll try to give him a call today. Moving is a real drag. I think this will be the last time I sell my house for at least 10 years. The plus is that I get to build a new shop now!
User avatar
JoeRainville
Posts: 4355
Joined: Tue Aug 02, 2005 12:00 am
Real Name: "John Deere Joe"
Location: Fort Worth, Texas
Contact:

Re: Make A Wish Project 340/S kickoff

Post by JoeRainville »

Hey Clack,

I am good with sending a gas cap. I have to remove a rotor for you, I just need to get to an arbor press this week. Front drivers should also be do-able. What address should I send parts to with you moving and such?

Thanks, and you are making us Deere guys proud with making progress on what was deffinately a tough project.

-Joe Rainville
Honorary Tech Editor

Chuck Norris doesn't get frost bite. He bites the frost.
clackinator
Posts: 122
Joined: Tue Dec 02, 2008 1:00 am
Location: Menahga, Minn.

Re: Make A Wish Project 340/S kickoff

Post by clackinator »

Thanks Joe,

Mailing address is still the same for a couple of weeks.... Then it will change, slightly. We built a new house on the other end of our property, so we are only moving about a quarter of a mile and our new mailbox is right next to the old one.

Justin Clack
11499 129th Ave.
Menahga, MN 56464
User avatar
JoeRainville
Posts: 4355
Joined: Tue Aug 02, 2005 12:00 am
Real Name: "John Deere Joe"
Location: Fort Worth, Texas
Contact:

Re: Make A Wish Project 340/S kickoff

Post by JoeRainville »

Justin,

Thanks, I am sending out a box today containing:
2 used drive sprockets: AM52913. I cleaned up the best set of non-cracked used ones I could find. I only had one NOS sprocket, or I would have sent a new set.
1 NOS gas cap
1 NOS roller and pin clutch kit for the 102-C drive: AM53733
1 used 340/s brake disk, bead blasted

Good Luck!
-Joe Rainville
Honorary Tech Editor

Chuck Norris doesn't get frost bite. He bites the frost.
clackinator
Posts: 122
Joined: Tue Dec 02, 2008 1:00 am
Location: Menahga, Minn.

Re: Make A Wish Project 340/S kickoff

Post by clackinator »

Anyone talked to JD Decal guy lately? I'm pretty sure it was him that volunteered a decal kit. Frank Sadlon also did, so whichever is fine with me.

Also, I am thinking I will check with John at Northern Crank. Jerome has not returned either of my emails and did not return my call. He may be out of the shop for a while or just very busy.
clackinator
Posts: 122
Joined: Tue Dec 02, 2008 1:00 am
Location: Menahga, Minn.

Re: Make A Wish Project 340/S kickoff

Post by clackinator »

The Windshield arrived today safe and sound. Thanks Webman for purchasing the windshield for the project. A very generous donation on your part!
clackinator
Posts: 122
Joined: Tue Dec 02, 2008 1:00 am
Location: Menahga, Minn.

Re: Make A Wish Project 340/S kickoff

Post by clackinator »

One more thing.....Thanks to Leon Koch from Crivitz, Wisconsin. He has volunteered to clean, inspect, repair and ship back our Kelsey Hayes brake set up. He repaired one of these for me a couple years ago and it worked perfect.
User avatar
WinnipegStPaul9
Posts: 5577
Joined: Sat Jul 23, 2005 12:00 am
Real Name: Don Amber
Location: Churubusco, IN

Re: Make A Wish Project 340/S kickoff

Post by WinnipegStPaul9 »

Clack, Kevin Campbell(kwc) has the track and is going to meet with Rainville when he heads to Princeton. DA
Feel free to check out our website www.buscobullet.com for restorations or parts.
clackinator
Posts: 122
Joined: Tue Dec 02, 2008 1:00 am
Location: Menahga, Minn.

Re: Make A Wish Project 340/S kickoff

Post by clackinator »

Great! Thanks Don. Still trying to make a contact with a crank rebuilder. I'm striking out so far.
clackinator
Posts: 122
Joined: Tue Dec 02, 2008 1:00 am
Location: Menahga, Minn.

Re: Make A Wish Project 340/S kickoff

Post by clackinator »

Just got a call from Jerome. We are sending the crank up to him and he will be doing the work. Kenny is donating some of the parts. Thanks to both of them!
augie
Posts: 22
Joined: Wed Nov 19, 2008 1:00 am
Location: masury ohio

Re: Make A Wish Project 340/S kickoff

Post by augie »

hello everyone,if its not to late i can send a pair of nos drivers out friday or saturday let me know. augie.
ICCSF 108
Posts: 4369
Joined: Sun Jul 17, 2005 12:00 am
Real Name: Kenny Heins, AKA Grumpy
Location: Blue Springs Mo.
Contact:

Re: Make A Wish Project 340/S kickoff

Post by ICCSF 108 »

Clack, I dropped off a 340/S seat foam for John to use on the Make A Wish Project 340/S sled

Kenny
AKA: Kenny, Grumpy, Mr. Richard Head
"I Hunt For it, Purchase it, Haul it, Sometimes Repair it, Sometimes Break it, Then Fix it Again, Label it, Warehouse it, Talk About it, So NOW, HOW Can I Take Any Less $$ For It?"
"God I love the smell of KLOTZ in the morning, That smell, you know that Gasoline/Oil Smell, MAKES the whole place SMELL like.. LIKE VICTORY. You know someday the 2 strokers are gonna end..."
Do Anti-War Protesters have reunions? If so what do they TALK about?
clackinator
Posts: 122
Joined: Tue Dec 02, 2008 1:00 am
Location: Menahga, Minn.

Re: Make A Wish Project 340/S kickoff

Post by clackinator »

Augie, thanks for the offer! I sent you a PM.

Kenny, thanks again for all the help! I'm sure the seat will turn out great.

Sorry I have been slow to respond, the computer at home is boxed up and ready to be moved to the new house, so I only get online when I come in to my office.
augie
Posts: 22
Joined: Wed Nov 19, 2008 1:00 am
Location: masury ohio

Re: Make A Wish Project 340/S kickoff

Post by augie »

hey guys , hows it going? i picked up drivers today, where should i ship them? thanks , augie
Post Reply