But seriously I was staring at the writing for a few minutes until I realized that it was stamped backwards. I wish I had a digital camera to post a pic. So I am guessing that there is something weird with this tank.
When they vacuum formed that one they had too much vacuum on it & sucked it inside out.
Kenny
AKA: Kenny, Grumpy, Mr. Richard Head
"I Hunt For it, Purchase it, Haul it, Sometimes Repair it, Sometimes Break it, Then Fix it Again, Label it, Warehouse it, Talk About it, So NOW, HOW Can I Take Any Less $$ For It?"
"God I love the smell of KLOTZ in the morning, That smell, you know that Gasoline/Oil Smell, MAKES the whole place SMELL like.. LIKE VICTORY. You know someday the 2 strokers are gonna end..."
Do Anti-War Protesters have reunions? If so what do they TALK about?
this is how I used to repair plastic fuel tanks, Make sure there is no gas fumes in the tank, then I used to take a steel rod grind it sort of pointed & heat it red hot the make a groove in the tank following the crack ( make sure you make it deep but not so deep that you go through the thickness of the tank, about 1/2 the thickness of the tank, then I would take one of those old clear plastic pound coffee can covers & use the torch to melt it & let the melted plastic drip into the crevice that you made in the tank with the hot rod. let the melted drops of plastic over fill the crevice some, then once everything gets a little hard I would heat the rod up again & then drag it over the excess & form a smooth patch. I never had one leak after using this method..
Kenny
AKA: Kenny, Grumpy, Mr. Richard Head
"I Hunt For it, Purchase it, Haul it, Sometimes Repair it, Sometimes Break it, Then Fix it Again, Label it, Warehouse it, Talk About it, So NOW, HOW Can I Take Any Less $$ For It?"
"God I love the smell of KLOTZ in the morning, That smell, you know that Gasoline/Oil Smell, MAKES the whole place SMELL like.. LIKE VICTORY. You know someday the 2 strokers are gonna end..."
Do Anti-War Protesters have reunions? If so what do they TALK about?
When I was restoring my Super Brute, I noticed the printing was backwards on mine too. Guess it must be so that people inside the tank can read it properly. That tank definately looks fixable, so don't discard it.
There is a place in Brandon that is supposed to be able to line the inside of the tank with a plastic of some sort. We pulled another 340 Super Brute home a few weeks ago and found the same problem with the tank.
, 
. You found me out.
