comet 102c clutch

crazzygunner · Post by **crazzygunner** » Wed Dec 02, 2009 9:19 pm

I am in the process of removing my comet 102c clutch are there any tricks or tips i was also wondering where I could get
a puller for it with the right thread.

Evan

400brian · Post by **400brian** » Thu Dec 03, 2009 2:20 am

The catalog retailers generally carry that puller. Dennis Kirk would be one.

Post by **Matt** » Thu Dec 03, 2009 8:09 am

Or give Jack at Durand Motorsports a call for a discount to JDsleds.com members.

crazzygunner · Post by **crazzygunner** » Thu Dec 03, 2009 8:22 pm

Thanks for the information i will look into those options.

Evan

crazzygunner · Post by **crazzygunner** » Mon Dec 07, 2009 5:44 pm

I got my clutch off over the weekend with a homeade puller and now have in new seals and half the moter together. All it took was a 3/4 16 threded rod and a grinding wheel and two nuts and a hour of grinding.

Evan

JDT · Post by **JDT** » Mon Dec 07, 2009 6:09 pm

Evan you got lucky.

As a rule threaded rod is very soft steel and bends easily. This can damage the crank end and threads.

crazzygunner · Post by **crazzygunner** » Mon Dec 07, 2009 6:40 pm

Thanks for the advice on threded rod.

Evan

comet 102c clutch

comet 102c clutch

Re: comet 102c clutch

Re: comet 102c clutch

Re: comet 102c clutch

Re: comet 102c clutch

Re: comet 102c clutch

Re: comet 102c clutch