Hi Guys,
I picked up a JD helmet at ST. Germain last weekend. It's really nice except the lining has detached
itself from the inside of the helmet. Does anybody have any ideas on the best way to fasten the liner
back to the inside of the helmet. Thanks.
Tom
JD helmet lining
-
WinnipegStPaul9
- Posts: 5577
- Joined: Sat Jul 23, 2005 12:00 am
- Real Name: Don Amber
- Location: Churubusco, IN
Re: JD helmet lining
Tom, I've got a similar problem with my helmet. Here's something you should try. Get a can of 3M spray on adhesive (sorry I can't remember the part name). Place the lining on your head just like it would go in the helmet. Spray the top side then put the helmet on.
PS: Let me know how it works....
DA
PS: Let me know how it works....
DA
Feel free to check out our website www.buscobullet.com for restorations or parts.
-
ICCSF 108
- Posts: 4369
- Joined: Sun Jul 17, 2005 12:00 am
- Real Name: Kenny Heins, AKA Grumpy
- Location: Blue Springs Mo.
- Contact:
Re: JD helmet lining
If the spray doesn't work I bet the yellow 3M weather strip adhesive in the tube will..
Kenny
Kenny
AKA: Kenny, Grumpy, Mr. Richard Head
"I Hunt For it, Purchase it, Haul it, Sometimes Repair it, Sometimes Break it, Then Fix it Again, Label it, Warehouse it, Talk About it, So NOW, HOW Can I Take Any Less $$ For It?"
"God I love the smell of KLOTZ in the morning, That smell, you know that Gasoline/Oil Smell, MAKES the whole place SMELL like.. LIKE VICTORY. You know someday the 2 strokers are gonna end..."
Do Anti-War Protesters have reunions? If so what do they TALK about?
"I Hunt For it, Purchase it, Haul it, Sometimes Repair it, Sometimes Break it, Then Fix it Again, Label it, Warehouse it, Talk About it, So NOW, HOW Can I Take Any Less $$ For It?"
"God I love the smell of KLOTZ in the morning, That smell, you know that Gasoline/Oil Smell, MAKES the whole place SMELL like.. LIKE VICTORY. You know someday the 2 strokers are gonna end..."
Do Anti-War Protesters have reunions? If so what do they TALK about?
Re: JD helmet lining
Thanks for the suggestions, I'll let you know how I make out.
Tom
Tom
-
AirborneX4Special
- Posts: 1450
- Joined: Sat Jan 30, 2010 10:54 am
- Real Name: Pat
- Location: N. IL
Re: JD helmet lining
I've used the 3M stuff to install tractor cab foam headliner kits and it's very strong and adheres quickly. You may not need very much to make a helmet liner stick. The old cab foam disintegrates with age and the outer cover, while still serviceable, will not stick to the junk foam because it constantly degrades. Hopefully the helmet foam is sturdy enough yet and you can have a good base for gluing.
Pat
Pat
-
78440liquid
- Posts: 110
- Joined: Fri Jul 22, 2005 12:00 am
Re: JD helmet lining
Don: That suggestion is too fuuny. I have this mental picture of a non-removable helmet in my head. Joel 
-
400brian
- Posts: 5626
- Joined: Wed Jul 20, 2005 12:00 am
- Real Name: James T. Kirk
- Location: South Central Wisconsin
Re: JD helmet lining
Good one Don!
My mother's '72 helmet is in great condition, but every time the wife wears it, the dust that used to be the foam, comes out through the lining.
On my helmets, where the foam is completely gone, ( lining still intact ) I wear a Carhartt fleece beanie under the helmet to make it fit snug.
http://www.gemplers.com/product/139164/ ... 1-Headwear
My mother's '72 helmet is in great condition, but every time the wife wears it, the dust that used to be the foam, comes out through the lining.
On my helmets, where the foam is completely gone, ( lining still intact ) I wear a Carhartt fleece beanie under the helmet to make it fit snug.
http://www.gemplers.com/product/139164/ ... 1-Headwear
'09 Vintage Challenge Survivor, and I wasn't late for supper!
'10, '11, '12, '13,'14,'15,'16,'17, '18, 19, 20, 21, 22 Vintage Challenge Survivor !
72 400 restored, Father bought new in '71
73 X8 restored
'74 340 green machine
'74 X8 9 time VC finisher
'78 Spitfire in progress
2 '75 340S 1 running, one on deck
'78 LF 440 future CC clone
'73 Skiroule RTX 440, 500 mi.
-
WinnipegStPaul9
- Posts: 5577
- Joined: Sat Jul 23, 2005 12:00 am
- Real Name: Don Amber
- Location: Churubusco, IN
Re: JD helmet lining
Joel, I was afraid I was being taken seriously for a little while....thanks for the post78440liquid wrote:Don: That suggestion is too fuuny. I have this mental picture of a non-removable helmet in my head. Joel
Feel free to check out our website www.buscobullet.com for restorations or parts.
Re: JD helmet lining
I think the product you are looking for is called "super 77" by 3M I use it all the time for my scrollsaw work.
To get the best bond, spray a fair coat on both surfaces to be joined and let them air for a moment or two before joining them. make sure you get things in the right place or you will play hell trying to separate them afterwards.
Joe
To get the best bond, spray a fair coat on both surfaces to be joined and let them air for a moment or two before joining them. make sure you get things in the right place or you will play hell trying to separate them afterwards.
Joe
-
AirborneX4Special
- Posts: 1450
- Joined: Sat Jan 30, 2010 10:54 am
- Real Name: Pat
- Location: N. IL
Re: JD helmet lining
Super 77 is correct.