Does anybody knew where you can find the spedometer bushing that goes in the hole in the drive axle on a trailfire
Clay
spedometer bushing
Forum rules
Classified Posting Guidelines:
#1: JD snowmobile and related items only.
#2: Please do not post negative opinion comments about an item or PRICE. The only replies should be legitimate questions from interested parties.
Classified Posting Guidelines:
#1: JD snowmobile and related items only.
#2: Please do not post negative opinion comments about an item or PRICE. The only replies should be legitimate questions from interested parties.
-
trailfire runner
- Posts: 198
- Joined: Sat Mar 05, 2011 8:10 pm
- Location: 43302
spedometer bushing
Clay Gerfen
My Sleds
1 1980 Trailfire 340 = Less than five hundred orginal miles
1 1980 Trailfire 440 = My Test Dummy
1 1980 Liquifire = Future race sled
1 1978 Spitfire
1 1979 Spitfire
My Sleds
1 1980 Trailfire 340 = Less than five hundred orginal miles
1 1980 Trailfire 440 = My Test Dummy
1 1980 Liquifire = Future race sled
1 1978 Spitfire
1 1979 Spitfire
-
WinnipegStPaul9
- Posts: 5577
- Joined: Sat Jul 23, 2005 12:00 am
- Real Name: Don Amber
- Location: Churubusco, IN
Re: spedometer bushing
Clay, are you referring to the speedo pin that is square on the ends and matches the drive axle to the speedometer.
DA
DA
Feel free to check out our website www.buscobullet.com for restorations or parts.
-
trailfire runner
- Posts: 198
- Joined: Sat Mar 05, 2011 8:10 pm
- Location: 43302
Re: spedometer bushing
Don, if you look up spedometer in a parts manul theres a bushing that truns the hole in the drive axle from a round hole to a square one that the pin goes into thats what Im refering to. I would also be inter rested in the speedo pin to
Clay
Clay
Clay Gerfen
My Sleds
1 1980 Trailfire 340 = Less than five hundred orginal miles
1 1980 Trailfire 440 = My Test Dummy
1 1980 Liquifire = Future race sled
1 1978 Spitfire
1 1979 Spitfire
My Sleds
1 1980 Trailfire 340 = Less than five hundred orginal miles
1 1980 Trailfire 440 = My Test Dummy
1 1980 Liquifire = Future race sled
1 1978 Spitfire
1 1979 Spitfire
-
nick80lf
- Posts: 1163
- Joined: Thu Jan 14, 2010 10:45 pm
- Real Name: Nick
- Location: The snow free zone of Ohio
Re: spedometer bushing
Matt might be able to get the speedo drive pin for you. The square pin was used on Skidoo and Polaris sleds. It is still listed in many distributors’ catalogs.
I'm not sure if this is the correct bushing but it's a start. You should check the dimensions.
http://cgi.ebay.com/ebaymotors/SPEEDO-B ... ccessories
I'm not sure if this is the correct bushing but it's a start. You should check the dimensions.
http://cgi.ebay.com/ebaymotors/SPEEDO-B ... ccessories
80 Liquifire (purchased 1996 ~ Running)
80 Liquifire (purchased 2010 ~ Running....Now)
80 Liquifire (purchased 2011 ~ Not running - I officially have a problem now)
83 Snowfire (purchased 2014 father/son restoration project)
78 Spitfire ~ sold (should have been shot for this)
80 Liquifire (purchased 2010 ~ Running....Now)
80 Liquifire (purchased 2011 ~ Not running - I officially have a problem now)
83 Snowfire (purchased 2014 father/son restoration project)
78 Spitfire ~ sold (should have been shot for this)
-
400brian
- Posts: 5626
- Joined: Wed Jul 20, 2005 12:00 am
- Real Name: James T. Kirk
- Location: South Central Wisconsin
Re: spedometer bushing
trailfire runner wrote:Don, if you look up spedometer in a parts manul theres a bushing that truns the hole in the drive axle from a round hole to a square one that the pin goes into thats what Im refering to. I would also be inter rested in the speedo pin to
Clay
You are looking for the Speedo drive bushing.
The guy in NY might be able to set you up, but there must be a contemporary source as well.
'09 Vintage Challenge Survivor, and I wasn't late for supper!
'10, '11, '12, '13,'14,'15,'16,'17, '18, 19, 20, 21, 22 Vintage Challenge Survivor !
72 400 restored, Father bought new in '71
73 X8 restored
'74 340 green machine
'74 X8 9 time VC finisher
'78 Spitfire in progress
2 '75 340S 1 running, one on deck
'78 LF 440 future CC clone
'73 Skiroule RTX 440, 500 mi.
-
JoeRainville
- Posts: 4355
- Joined: Tue Aug 02, 2005 12:00 am
- Real Name: "John Deere Joe"
- Location: Fort Worth, Texas
- Contact:
Re: spedometer bushing
I have NOS speedo hardware kits that include the drive bushing, the drive pin and misc. hardware for $10.00 plus shipping. Hurry, as I am only home until Weds if you need one. Won't be back for a few weeks again.
-Joe Rainville
joerainville@hotmail.com
-Joe Rainville
joerainville@hotmail.com
Honorary Tech Editor
Chuck Norris doesn't get frost bite. He bites the frost.
Chuck Norris doesn't get frost bite. He bites the frost.