wanted: walbro wda 31 carb

johndeerejamie · Post by **johndeerejamie** » Tue Jan 24, 2012 7:58 am

i need a walbro carb as the title says, looking for one that is in running condition. it is for a 77 john deere 300
let me know what you may have, please email me if you may have something
thanks

kiegelsk8er@hotmail.com

johndeerejamie · Post by **johndeerejamie** » Wed Jan 25, 2012 8:14 am

still looking...

johndeerejamie · Post by **johndeerejamie** » Sat Jan 28, 2012 12:22 pm

to the top

johndeerejamie · Post by **johndeerejamie** » Sun Feb 05, 2012 3:21 pm

still looking...

SpitfireKing · Post by **SpitfireKing** » Sun Feb 05, 2012 4:10 pm

Can you not rebuild the one you have or rebuild a used one? The only real "ready to run" ones I've seen have been on ebay for like $150+, so be prepared to pay....I can get you a carb off a sled, but i'm sure it needs a kit.

johndeerejamie · Post by **johndeerejamie** » Mon Feb 06, 2012 6:33 pm

well i just completely gave up on this thing, ive taken it apart like 20 times and cant figure it out. i bought a diaphram kit already...its really frusterating. 150 isnt crazy, the rebuild kit is a hundred bucks, so i was hoping maybe someone had one ready to go.

JD600 · Post by **JD600** » Mon Feb 06, 2012 7:27 pm

These carbs usually aren't that tricky. Typically the Walbro gets blamed for other issues within the engine itself. What are your symptoms that lead you to believe that the carb is at fault?

DE

johndeerejamie · Post by **johndeerejamie** » Mon Feb 06, 2012 9:05 pm

it spits gas out of the back of it where theres a drain hole. i cant figure out for the life of me why, all the gaskets are new and i have checked all the ridges on the plates and i soaked everything in carb cleaner so it is clean, needles aprear in good shape, just cant figure it out. ive tinkered with the metering lever as well

everytime i put it back together it will start right away run for a second and then gas starts leaking and it stops running .

JD600 · Post by **JD600** » Mon Feb 06, 2012 9:15 pm

You probably have something plugged in the idle circuit. PM sent.

DE

johndeerejamie · Post by **johndeerejamie** » Mon Feb 06, 2012 9:31 pm

would that be in the actual carb housing or one of those plates?

JD600 · Post by **JD600** » Mon Feb 06, 2012 9:37 pm

Could be in either, but most likely in the carb housing.

DE

johndeerejamie · Post by **johndeerejamie** » Fri Oct 19, 2012 7:03 pm

Just to update this for reference, I bought another carb gasket kit, it was a winderosa and it is now running fine. The STX or whatever brand didn't work.

SpitfireKing · Post by **SpitfireKing** » Sun Oct 21, 2012 12:08 am

That's funny, I have a winderosa kit and it never would work, tried it in 2 different carbs. I had changed my crank seals etc so I know it was the kit

JDT · Post by **JDT** » Sun Oct 21, 2012 5:43 pm

I believe those aftermarket kits are all made by the same company, just packaged differently.

Even an OEM kit can have a bad component.

Makes one appreciate the Carb more when you have to R&R it three times to make it work.

wanted: walbro wda 31 carb

wanted: walbro wda 31 carb

Re: wanted: walbro wda 31 carb

Re: wanted: walbro wda 31 carb

Re: wanted: walbro wda 31 carb

Re: wanted: walbro wda 31 carb

Re: wanted: walbro wda 31 carb

Re: wanted: walbro wda 31 carb

Re: wanted: walbro wda 31 carb

Re: wanted: walbro wda 31 carb

Re: wanted: walbro wda 31 carb

Re: wanted: walbro wda 31 carb

Re: wanted: walbro wda 31 carb

Re: wanted: walbro wda 31 carb

Re: wanted: walbro wda 31 carb