Trying to identify a couple tools that don't appear to ever have been used and some other part. Anyone know specifically what they're used for?
JDM-104
JDM-41-5
M66939x
JDM-104 & JDM-41-5 & M66939x
Forum rules
Classified Posting Guidelines:
#1: JD snowmobile and related items only.
#2: Please do not post negative opinion comments about an item or PRICE. The only replies should be legitimate questions from interested parties.
Classified Posting Guidelines:
#1: JD snowmobile and related items only.
#2: Please do not post negative opinion comments about an item or PRICE. The only replies should be legitimate questions from interested parties.
JDM-104 & JDM-41-5 & M66939x
- Attachments
-
-
-
-
WinnipegStPaul9
- Posts: 5577
- Joined: Sat Jul 23, 2005 12:00 am
- Real Name: Don Amber
- Location: Churubusco, IN
Re: JDM-104 & JDM-41-5 & M66939x
Randy, those tools are of no value. Suggest they be sent to Indiana for further examination.
DA
DA
Feel free to check out our website www.buscobullet.com for restorations or parts.
-
Sprailfire340
- Posts: 925
- Joined: Tue Oct 07, 2008 12:00 am
- Location: Rockford, MN
Re: JDM-104 & JDM-41-5 & M66939x
JDM-104 is a Flywheel Holding Tool for the Kohler Spitfires
I'm not sure what JDM-41-5 is, but sequencially it follows the service kit JDM-1-C which is listed in SM-2100
JDM-41-1 Clutch Puller
JDM-41-2 Screw Assembly, Swivel and Ring
JDM-41-3 Spider Tool
JDM-41-4 Two-Piece Nut
JDM-42 Clutch Pulley Aligner
JDM-43 Flyweight Retaining Tool
I'm not sure what JDM-41-5 is, but sequencially it follows the service kit JDM-1-C which is listed in SM-2100
JDM-41-1 Clutch Puller
JDM-41-2 Screw Assembly, Swivel and Ring
JDM-41-3 Spider Tool
JDM-41-4 Two-Piece Nut
JDM-42 Clutch Pulley Aligner
JDM-43 Flyweight Retaining Tool
MERe: JDM-104 & JDM-41-5 & M66939x
You're on a roll Mitch... don't stop there. Unless the JDM-104 also works on a Kawasaki Spitfire, I don't need it.
Re: JDM-104 & JDM-41-5 & M66939x
Thank you everyone for the info below, much appreciated. Looks like none will be of any use for my sleds.
JDM-104 is a Flywheel Holding Tool for the Kohler Spitfires
JDM-41-5 - The square block with the pin is to use on a Comet 100 Series Clutch...you install the tool for the spider removal, then install this block & put the block in a vice. Then, using a breaker bar, loosen or tighten the spider.
M66939x - The curved piece of flat steel is intended to be welded on the front of the '74 - '76 suspension rail when installing the 2/3 track; it replaces the small round rod.
JDM-104 is a Flywheel Holding Tool for the Kohler Spitfires
JDM-41-5 - The square block with the pin is to use on a Comet 100 Series Clutch...you install the tool for the spider removal, then install this block & put the block in a vice. Then, using a breaker bar, loosen or tighten the spider.
M66939x - The curved piece of flat steel is intended to be welded on the front of the '74 - '76 suspension rail when installing the 2/3 track; it replaces the small round rod.
-
WinnipegStPaul9
- Posts: 5577
- Joined: Sat Jul 23, 2005 12:00 am
- Real Name: Don Amber
- Location: Churubusco, IN
Re: JDM-104 & JDM-41-5 & M66939x
Interested in the 41-5.
DA
DA
Feel free to check out our website www.buscobullet.com for restorations or parts.
-
cledussnow77
- Posts: 573
- Joined: Mon Nov 12, 2007 1:00 am
- Real Name: Ed Jones
- Location: northwest ohio
Re: JDM-104 & JDM-41-5 & M66939x
I would be interested in the JD-104 seeing how I have 5 of them it would be very helpful.
Nothing Runs Like A Deere
Re: JDM-104 & JDM-41-5 & M66939x
What? Nobody wants the piece of bent iron??? 
-
ICCSF 108
- Posts: 4369
- Joined: Sun Jul 17, 2005 12:00 am
- Real Name: Kenny Heins, AKA Grumpy
- Location: Blue Springs Mo.
- Contact:
Re: JDM-104 & JDM-41-5 & M66939x
Randy, How much for the bent piece of Iron shipped to 64014, I have one I might as well have 2 right?
Kenny
Kenny
AKA: Kenny, Grumpy, Mr. Richard Head
"I Hunt For it, Purchase it, Haul it, Sometimes Repair it, Sometimes Break it, Then Fix it Again, Label it, Warehouse it, Talk About it, So NOW, HOW Can I Take Any Less $$ For It?"
"God I love the smell of KLOTZ in the morning, That smell, you know that Gasoline/Oil Smell, MAKES the whole place SMELL like.. LIKE VICTORY. You know someday the 2 strokers are gonna end..."
Do Anti-War Protesters have reunions? If so what do they TALK about?
"I Hunt For it, Purchase it, Haul it, Sometimes Repair it, Sometimes Break it, Then Fix it Again, Label it, Warehouse it, Talk About it, So NOW, HOW Can I Take Any Less $$ For It?"
"God I love the smell of KLOTZ in the morning, That smell, you know that Gasoline/Oil Smell, MAKES the whole place SMELL like.. LIKE VICTORY. You know someday the 2 strokers are gonna end..."
Do Anti-War Protesters have reunions? If so what do they TALK about?
Re: JDM-104 & JDM-41-5 & M66939x
Kenny --- it's on the way.
cledussnow77 --- the JD-104 is yours if you want it. PM sent.
Randy
cledussnow77 --- the JD-104 is yours if you want it. PM sent.
Randy
-
cledussnow77
- Posts: 573
- Joined: Mon Nov 12, 2007 1:00 am
- Real Name: Ed Jones
- Location: northwest ohio
