needle bearing sizes??
-
sledder670
- Posts: 697
- Joined: Mon Oct 26, 2009 9:45 pm
- Real Name: Brad Wheelock (wheel)
- Location: rockford, il
needle bearing sizes??
I know we are looking for needle bearings for different machines. Has anyone played with cageless needle bearings. I know that is what all the new skidoo's use now and the 800 twins use a 20x25x23. As long as we had one that the pin diameter was half of the difference between i.d. and o.d. it should work and there is twice the roller surface as well. just a thought i had
I buy sell and service all brands. Contact me and i might be able to help. sleds 2-liquidators, 75 340/S, 80 liquifire, 78 440 liquifire, 75 jd 300, 83 9700 skidoo blizzard, 86 skidoo formula plus, 79 motoski super sonic, 91 skidoo mach 1 x, 92 formula plus x, 95 mxz 440, 3 toni hiakonen edition mxz's, 98 mxzx, 97 mxzx, 77 skidoo rv cross coutry, 77 skidoo Rv 340, 75 skidoo tnt 340FA, 97skidoo formula3LT, 06 800 skidoo summit, 08 skidoo tnt full trail mod with nos
-
400brian
- Posts: 5620
- Joined: Wed Jul 20, 2005 12:00 am
- Real Name: James T. Kirk
- Location: South Central Wisconsin
Re: needle bearing sizes??
It has been brought up, but that is about it as far as I know.
http://www.jdsleds.com/community/viewto ... 13&t=12965
http://www.jdsleds.com/community/viewto ... 13&t=12965
'09 Vintage Challenge Survivor, and I wasn't late for supper!
'10, '11, '12, '13,'14,'15,'16,'17, '18, 19, 20, 21, 22 Vintage Challenge Survivor !
72 400 restored, Father bought new in '71
73 X8 restored
'74 340 green machine
'74 X8 9 time VC finisher
'78 Spitfire in progress
2 '75 340S 1 running, one on deck
'78 LF 440 future CC clone
'73 Skiroule RTX 440, 500 mi.
-
ICCSF 108
- Posts: 4369
- Joined: Sun Jul 17, 2005 12:00 am
- Real Name: Kenny Heins, AKA Grumpy
- Location: Blue Springs Mo.
- Contact:
Re: needle bearing sizes??
I had a friend that told me changing them on his wife's Ski Doo is a bitch if you don't purchase Ski Doo's installation tool. which I would imagine that you would need a different tool for each different size pin/rod hole??
Kenny
Kenny
AKA: Kenny, Grumpy, Mr. Richard Head
"I Hunt For it, Purchase it, Haul it, Sometimes Repair it, Sometimes Break it, Then Fix it Again, Label it, Warehouse it, Talk About it, So NOW, HOW Can I Take Any Less $$ For It?"
"God I love the smell of KLOTZ in the morning, That smell, you know that Gasoline/Oil Smell, MAKES the whole place SMELL like.. LIKE VICTORY. You know someday the 2 strokers are gonna end..."
Do Anti-War Protesters have reunions? If so what do they TALK about?
"I Hunt For it, Purchase it, Haul it, Sometimes Repair it, Sometimes Break it, Then Fix it Again, Label it, Warehouse it, Talk About it, So NOW, HOW Can I Take Any Less $$ For It?"
"God I love the smell of KLOTZ in the morning, That smell, you know that Gasoline/Oil Smell, MAKES the whole place SMELL like.. LIKE VICTORY. You know someday the 2 strokers are gonna end..."
Do Anti-War Protesters have reunions? If so what do they TALK about?
-
sledder670
- Posts: 697
- Joined: Mon Oct 26, 2009 9:45 pm
- Real Name: Brad Wheelock (wheel)
- Location: rockford, il
Re: needle bearing sizes??
it is not fun lots of choise words and grease everywhere. It is just an idea. Western powersports has a 19mm id but it is a 24 mm od top needle bearing made by hot rods.
I buy sell and service all brands. Contact me and i might be able to help. sleds 2-liquidators, 75 340/S, 80 liquifire, 78 440 liquifire, 75 jd 300, 83 9700 skidoo blizzard, 86 skidoo formula plus, 79 motoski super sonic, 91 skidoo mach 1 x, 92 formula plus x, 95 mxz 440, 3 toni hiakonen edition mxz's, 98 mxzx, 97 mxzx, 77 skidoo rv cross coutry, 77 skidoo Rv 340, 75 skidoo tnt 340FA, 97skidoo formula3LT, 06 800 skidoo summit, 08 skidoo tnt full trail mod with nos
-
That Girl Racing
- Posts: 683
- Joined: Fri Jul 22, 2005 12:00 am
- Real Name: Peter
Re: needle bearing sizes??
BRP does it for cost savings. Most engines guys replace them with caged sets. Peter
-
Joliet Jake
- Posts: 122
- Joined: Mon Feb 05, 2007 1:00 am
- Location: Joliet,IL
Re: needle bearing sizes??
Skidoo sells the cageless bears in a plastic case that holds the bearings in...
you insert the bearings in the rod end and the outer cage is removed while a small dowel pin is left in the center of the bearings.
When the piston is installed on the rod end the wrist pin pushes out the plastic dowel and the installation is complete.
The problem is when you remove the original piston if you don’t have a extra set of these or don’t have the skidoo tool, you can have a mess on your hands!!!…I build a barricade every time I install or remove these because you know were they fall!……..then you have to count the individual bearings to make sure you found them all!!!
Like “That Girl” stated …..if you plan on removing pistons often …….IE racing, the caged bearings are for sale.
I asked a Skidoo rep once and he said the cages heat up and take up space that can be used for bearing surface………………….I personally never had a caged bearing fail ……..even on the nitrous engines
you insert the bearings in the rod end and the outer cage is removed while a small dowel pin is left in the center of the bearings.
When the piston is installed on the rod end the wrist pin pushes out the plastic dowel and the installation is complete.
The problem is when you remove the original piston if you don’t have a extra set of these or don’t have the skidoo tool, you can have a mess on your hands!!!…I build a barricade every time I install or remove these because you know were they fall!……..then you have to count the individual bearings to make sure you found them all!!!
Like “That Girl” stated …..if you plan on removing pistons often …….IE racing, the caged bearings are for sale.
I asked a Skidoo rep once and he said the cages heat up and take up space that can be used for bearing surface………………….I personally never had a caged bearing fail ……..even on the nitrous engines
72 300
75 LIQUIFIRE
76 LIQUIFIRE
78 LIQUIFIRE
78 CYCLONE
80 TRAILFIRE
81 SRX
83 LIQUIFIRE
83 SPRINTFIRE
88 650 INDY
94 MACH Z
2000 MACH Z
2005 MACH Z
S 35 BONANZA
75 LIQUIFIRE
76 LIQUIFIRE
78 LIQUIFIRE
78 CYCLONE
80 TRAILFIRE
81 SRX
83 LIQUIFIRE
83 SPRINTFIRE
88 650 INDY
94 MACH Z
2000 MACH Z
2005 MACH Z
S 35 BONANZA
Re: needle bearing sizes??
a year or 2 ago when i was 14 we raced mcculloch 91cc go-carts and they used roll pins with out a cage. it was the only part of the engine i was not allowed to assemble at 14.
Thanks,
Ted
3 Liquidators
1-340/S
1-295/S
1-78 Cross Country Liquifire
Gave away-sold-swapped:8 Liquidators, 78 C.C. Liquifire, 340/S, 295/S, 84 Snowfire, 82 Liquifire, 80 Liquifire, 78 440 liquifire, 77 Liquifire.
Ted
3 Liquidators
1-340/S
1-295/S
1-78 Cross Country Liquifire
Gave away-sold-swapped:8 Liquidators, 78 C.C. Liquifire, 340/S, 295/S, 84 Snowfire, 82 Liquifire, 80 Liquifire, 78 440 liquifire, 77 Liquifire.
-
80spitfire
- Posts: 804
- Joined: Tue Aug 31, 2010 6:59 pm
- Real Name: Brian Kottke
- Location: Southern Minnesota
Re: needle bearing sizes??
I feel like cageless bearings would be a real pain in the a*% to deal with. I'll take the extra heat personally.
-Brian
-Brian
72' 500 Restored
74' 295/S Unrestored
75' 340/S Rider
76' Liquidator Restored
77' Liquifire Rider
80' Spitfire Restored
74' 295/S Unrestored
75' 340/S Rider
76' Liquidator Restored
77' Liquifire Rider
80' Spitfire Restored
Re: needle bearing sizes??
some engines like a dator engine use a odd size, that no one is able to find anymore. i think its 19mm and this may be one alternative. yes a caged bearing is much easier to work with.
Thanks,
Ted
3 Liquidators
1-340/S
1-295/S
1-78 Cross Country Liquifire
Gave away-sold-swapped:8 Liquidators, 78 C.C. Liquifire, 340/S, 295/S, 84 Snowfire, 82 Liquifire, 80 Liquifire, 78 440 liquifire, 77 Liquifire.
Ted
3 Liquidators
1-340/S
1-295/S
1-78 Cross Country Liquifire
Gave away-sold-swapped:8 Liquidators, 78 C.C. Liquifire, 340/S, 295/S, 84 Snowfire, 82 Liquifire, 80 Liquifire, 78 440 liquifire, 77 Liquifire.
-
80spitfire
- Posts: 804
- Joined: Tue Aug 31, 2010 6:59 pm
- Real Name: Brian Kottke
- Location: Southern Minnesota
Re: needle bearing sizes??
Right, I get what you're saying. Believe me I know more than anybody how hard those bearings are to find for the Dators especially when you only need one and no one will sell you one. Fortunately though, it sounds like Larry found another caged bearing that will work on the Dator so it looks like we're set for a while again.Dator76 wrote:some engines like a dator engine use a odd size, that no one is able to find anymore. i think its 19mm and this may be one alternative. yes a caged bearing is much easier to work with.
-Brian
72' 500 Restored
74' 295/S Unrestored
75' 340/S Rider
76' Liquidator Restored
77' Liquifire Rider
80' Spitfire Restored
74' 295/S Unrestored
75' 340/S Rider
76' Liquidator Restored
77' Liquifire Rider
80' Spitfire Restored
Re: needle bearing sizes??
did he say what it was out of?
Thanks,
Ted
3 Liquidators
1-340/S
1-295/S
1-78 Cross Country Liquifire
Gave away-sold-swapped:8 Liquidators, 78 C.C. Liquifire, 340/S, 295/S, 84 Snowfire, 82 Liquifire, 80 Liquifire, 78 440 liquifire, 77 Liquifire.
Ted
3 Liquidators
1-340/S
1-295/S
1-78 Cross Country Liquifire
Gave away-sold-swapped:8 Liquidators, 78 C.C. Liquifire, 340/S, 295/S, 84 Snowfire, 82 Liquifire, 80 Liquifire, 78 440 liquifire, 77 Liquifire.
-
That Girl Racing
- Posts: 683
- Joined: Fri Jul 22, 2005 12:00 am
- Real Name: Peter
Re: needle bearing sizes??
www.CVtech--aab.com has listings of every available pin, bearing, connecting rod etc. for two stroke engines. Dimensions, c-c etc. Very good resource. Peter
-
80spitfire
- Posts: 804
- Joined: Tue Aug 31, 2010 6:59 pm
- Real Name: Brian Kottke
- Location: Southern Minnesota
Re: needle bearing sizes??
No he didn't say what it came from.Dator76 wrote:did he say what it was out of?
72' 500 Restored
74' 295/S Unrestored
75' 340/S Rider
76' Liquidator Restored
77' Liquifire Rider
80' Spitfire Restored
74' 295/S Unrestored
75' 340/S Rider
76' Liquidator Restored
77' Liquifire Rider
80' Spitfire Restored