Parts list of needed items:

liquitisplit80 · Post by **liquitisplit80** » Wed Feb 15, 2012 3:05 pm

Hey guys, looking for these items:
chain case with roller tensioner
chain case guard p.n. am55333 (item 23 in diagram)
heavy duty brake disk p.n. am54181
heavy duty tow hitch p.n. am55206 (has the double plate tongue)
hitch pin kit p.n. am55231
tether switch p.n. am55189
new or very good used c/c windshield
good JD backrest with brackets

Let me know if you can help me out.
Thanks

TASKY · Post by **TASKY** » Wed Feb 15, 2012 3:47 pm

Liquiti, I have nos backrest cushions. I have some brackets but they have a lot of surface rust on them. Let me know if I can help billtasky@hotmail.com Thanks Bill

RLFollman · Post by **RLFollman** » Wed Feb 15, 2012 5:08 pm

I have a NOS AM55206 hitch plate available, as you've indicated. Again, that number is just the hitch plate. Or, I can combine the hitch plate with a NOS M63247 Pin, NOS AM55206 Heavy Duty Hitch Tongue (double), and NOS Hitch Pin.

I also have the complete NOS AM55207 Heavy Duty Hitch Kit with the heavy duty double hitch tongue.

Also available is a used chain case and cover. I have a used standard hitch with single tongue in good condition.

Randy

liquitisplit80 · Post by **liquitisplit80** » Thu Feb 16, 2012 9:50 pm

PM me with some prices.
Thanks,
-Roy.

TASKY · Post by **TASKY** » Thu Feb 16, 2012 11:39 pm

$65.00 shipped to your door

liquitisplit80 · Post by **liquitisplit80** » Tue Feb 21, 2012 12:24 am

Tasky,
If I could find some nice shiny brackets to go with that backrest I'd take it! We need to find someone who does chrome work!

codebluemi · Post by **codebluemi** » Tue Feb 21, 2012 7:24 am

i am parting out a 82 sportfire just wondering if the parts you need will fit your sled just let me know.

thanks,bob

my email is xxxrsballa@comcast.net

take the 3'x out of email before reply

liquitisplit80 · Post by **liquitisplit80** » Wed Feb 22, 2012 2:58 pm

Bob,
Thanks for the offer. I'm parting out an 82 sport too. There would be no way of knowing if your sled has what I'm looking for because these parts are options. The only way to know for sure is to visually verify.
-Roy

liquitisplit80 · Post by **liquitisplit80** » Tue Apr 10, 2012 4:45 pm

I am still looking for the chain case guard. P.N.AM55333, item 23 in the diagram. If any body has one please let me know. Even if you dont want to sell it, perhaps you could give the dimensions and post a pic of it. Even a verbal description from someone who used to have one or knows what it looks like would help. What gauge of metal was used, how wide was it, what holes in the chassis did it bolt to, etc... as I will try to make one. This is the last item I need for my build. Any help would be appreciated!

Deere Daze · Post by **Deere Daze** » Sun Apr 15, 2012 9:45 am

@liquitisplit80 , the chain case guard mounts to the chain case mounting bolts and is the width of the case, not the case and cover.I know I have atleast one NOS one but may be sometime before I dig it out.I cant sell that one to you but I have one on the 340 Special im working on and if that ones still ok i'll sell that one.

liquitisplit80 · Post by **liquitisplit80** » Mon Apr 16, 2012 1:34 pm

Deere Daze,
Thanks for responding. I'm glad to know you are working on a Canadian Special too! Mine's not the real deal, just wanted to make a replica to let people know that they were made and what they looked like. I have lots of questions about this sled, want to make it as close to an original as possible so any pics and advise would be welcome. I also contacted the John Deere Archives in Moline, still waiting to hear from them.
Thanks again.

Parts list of needed items:

Parts list of needed items:

Re: Parts list of needed items:

Re: Parts list of needed items:

Re: Parts list of needed items:

Re: Parts list of needed items:

Re: Parts list of needed items:

Re: Parts list of needed items:

Re: Parts list of needed items:

Re: Chain case guard wanted

Re: Parts list of needed items:

Re: Parts list of needed items: