Interest in JDM-81 Clutch Align Tool build?
Re: Interest in JDM-81 Clutch Align Tool build?
I have a shop could possibly help with this.
Anyone have a pic and some dimensions of this tool.
Thanks
Anyone have a pic and some dimensions of this tool.
Thanks
- WinnipegStPaul9
- Posts: 5577
- Joined: Sat Jul 23, 2005 12:00 am
- Real Name: Don Amber
- Location: Churubusco, IN
Re: Interest in JDM-81 Clutch Align Tool build?
I learned today that my shop is not wanting to produce this item due to a high work load at this time. Sorry.
DA
DA
Feel free to check out our website www.buscobullet.com for restorations or parts.
-
- Posts: 697
- Joined: Mon Oct 26, 2009 9:45 pm
- Real Name: Brad Wheelock (wheel)
- Location: rockford, il
Re: Interest in JDM-81 Clutch Align Tool build?
I have most of the alignment tools. I may be able to make them at work. I'll take a look tomorrow.
I buy sell and service all brands. Contact me and i might be able to help. sleds 2-liquidators, 75 340/S, 80 liquifire, 78 440 liquifire, 75 jd 300, 83 9700 skidoo blizzard, 86 skidoo formula plus, 79 motoski super sonic, 91 skidoo mach 1 x, 92 formula plus x, 95 mxz 440, 3 toni hiakonen edition mxz's, 98 mxzx, 97 mxzx, 77 skidoo rv cross coutry, 77 skidoo Rv 340, 75 skidoo tnt 340FA, 97skidoo formula3LT, 06 800 skidoo summit, 08 skidoo tnt full trail mod with nos
- jdbornagain
- Posts: 17
- Joined: Wed Jan 21, 2015 2:02 pm
- Real Name: Nick
- Location: Wisconsin
Re: Interest in JDM-81 Clutch Align Tool build?
I would also be interested.
Thank-you!
Thank-you!
-
- Posts: 573
- Joined: Mon Nov 12, 2007 1:00 am
- Real Name: Ed Jones
- Location: northwest ohio
Re: Interest in JDM-81 Clutch Align Tool build?
My wife works at a machine shop, just throwing it out there. not sure if they could do it off pics and measurements or if they would need the tools themselves. Just a thought.
Nothing Runs Like A Deere
-
- Posts: 697
- Joined: Mon Oct 26, 2009 9:45 pm
- Real Name: Brad Wheelock (wheel)
- Location: rockford, il
Re: Interest in JDM-81 Clutch Align Tool build?
i can make these pretty easily at work if someone else is not doing it. I can get a price on the material (most is probably scrap around the shop). I also have other tools I could make if guys need them including jdm-12-2, jdm-104, jdm-64-1, jdm-42, jdm-12-3, jdm-107, jdg-47, jdm-6. They were made by OTC they might be available somewhere.
I buy sell and service all brands. Contact me and i might be able to help. sleds 2-liquidators, 75 340/S, 80 liquifire, 78 440 liquifire, 75 jd 300, 83 9700 skidoo blizzard, 86 skidoo formula plus, 79 motoski super sonic, 91 skidoo mach 1 x, 92 formula plus x, 95 mxz 440, 3 toni hiakonen edition mxz's, 98 mxzx, 97 mxzx, 77 skidoo rv cross coutry, 77 skidoo Rv 340, 75 skidoo tnt 340FA, 97skidoo formula3LT, 06 800 skidoo summit, 08 skidoo tnt full trail mod with nos
-
- Posts: 289
- Joined: Thu Nov 01, 2007 12:00 am
- Real Name: Keith Bylin
- Location: NE North Dakota
Re: Interest in JDM-81 Clutch Align Tool build?
Hello Brad,
At this time I do not have anyone lined up to build this. I figured the first order of business was to get a quantity estimate with a price range in mind, then visit with a builder to get a firmer price (to us vintage guys price in important). Brad if you have the means to build this tool to the tolerances Deere had back in the day and would like to build and fill the needs this post has shown, that would be great (me included). Spring planting is not far away and then I will not even have time to read posts, let alone move this project along. Keep us posted what your thoughts are.
Thanks,
keith
At this time I do not have anyone lined up to build this. I figured the first order of business was to get a quantity estimate with a price range in mind, then visit with a builder to get a firmer price (to us vintage guys price in important). Brad if you have the means to build this tool to the tolerances Deere had back in the day and would like to build and fill the needs this post has shown, that would be great (me included). Spring planting is not far away and then I will not even have time to read posts, let alone move this project along. Keep us posted what your thoughts are.
Thanks,
keith
-
- Posts: 697
- Joined: Mon Oct 26, 2009 9:45 pm
- Real Name: Brad Wheelock (wheel)
- Location: rockford, il
Re: Interest in JDM-81 Clutch Align Tool build?
If i get some free time, currently remodeling a house and still working on sleds. I have it at work I just havn't had time to look at it much.
I buy sell and service all brands. Contact me and i might be able to help. sleds 2-liquidators, 75 340/S, 80 liquifire, 78 440 liquifire, 75 jd 300, 83 9700 skidoo blizzard, 86 skidoo formula plus, 79 motoski super sonic, 91 skidoo mach 1 x, 92 formula plus x, 95 mxz 440, 3 toni hiakonen edition mxz's, 98 mxzx, 97 mxzx, 77 skidoo rv cross coutry, 77 skidoo Rv 340, 75 skidoo tnt 340FA, 97skidoo formula3LT, 06 800 skidoo summit, 08 skidoo tnt full trail mod with nos
- Horicon Joe
- Posts: 1091
- Joined: Mon Jul 18, 2005 12:00 am
- Real Name: Joe Wanie
- Location: ROLLING PRAIRIE WI
Re: Interest in JDM-81 Clutch Align Tool build?
I took over on the build of these. Here is the slightly improved version of the original.
Design now complete after complete measurement with CMM.
Joe
Design now complete after complete measurement with CMM.
Joe
Please add your Real Name in your User Profile or at least your first Name!
Re: Interest in JDM-81 Clutch Align Tool build?
Looks SWEEEEEEEEET ! PS i noticed the JW. Brock
- jdbornagain
- Posts: 17
- Joined: Wed Jan 21, 2015 2:02 pm
- Real Name: Nick
- Location: Wisconsin
Re: Interest in JDM-81 Clutch Align Tool build?
Nice work Joe, when will these be available?
-
- Posts: 289
- Joined: Thu Nov 01, 2007 12:00 am
- Real Name: Keith Bylin
- Location: NE North Dakota
Re: Interest in JDM-81 Clutch Align Tool build?
Joe,
Thanks for doing this. Your work in the past has been impeccable!
For those that are interested in owning this tool for getting the most out of your old Deere, watch this thread close in the next few weeks. It might be a "last chance"!
keith
Thanks for doing this. Your work in the past has been impeccable!
For those that are interested in owning this tool for getting the most out of your old Deere, watch this thread close in the next few weeks. It might be a "last chance"!
keith
Re: Interest in JDM-81 Clutch Align Tool build?
I am interested in one also.
-
- Posts: 289
- Joined: Thu Nov 01, 2007 12:00 am
- Real Name: Keith Bylin
- Location: NE North Dakota
Re: Interest in JDM-81 Clutch Align Tool build?
FYI.... b. hendrion and others to the north,
Joe has taken over this project but since my work is only 20 miles south of Manitoba border, I will offer to help him with delivery to you and others north, if he should so need. My guess is the more orders the lower the cost too.
keith
Joe has taken over this project but since my work is only 20 miles south of Manitoba border, I will offer to help him with delivery to you and others north, if he should so need. My guess is the more orders the lower the cost too.
keith
-
- Posts: 705
- Joined: Tue Jan 26, 2010 10:05 am
- Real Name: Lloyd
- Location: near Port Elgin, Ontario
Re: Interest in JDM-81 Clutch Align Tool build?
Do we have a cost on theses yet?
Several Deere's
Several Kawasaki's
ACSCC #1534
Several Kawasaki's
ACSCC #1534