Gas leaking from Carb

jdfan · Post by **jdfan** » Sun Jan 16, 2011 1:57 pm

i just cleaned my carbs and adjusted everything. i have gas leaking from the overflow now. i pulled the bowl off to check my floats. they move up and down fine. i went back in the book and found the spec for the float arm (.909) where do i measure that? do i measure from the float arm to the carb when it is all the way to the float side or to the carb side?

Danzig · Post by **Danzig** » Sun Jan 16, 2011 2:04 pm

what sled is this ? Mikuni roundslide ? Mikuni Butterfly? Walbro ?

moontree · Post by **moontree** » Sun Jan 16, 2011 2:30 pm

check this thread from a week ago
http://www.jdsleds.com/community/viewto ... =1&t=11354

jdfan · Post by **jdfan** » Sun Jan 16, 2011 4:36 pm

one of the float was sticking a little. guess i didn't clean it enough.

Gas leaking from Carb

Gas leaking from Carb

Re: Gas leaking from Carb

Re: Gas leaking from Carb

Re: Gas leaking from Carb