WTB: Flywheel for Prestolite Ignition

[tieszo6]

Hello,
I have a flywheel from a 295/S that must have sat with water around it for many years as it is rusted beyond functioning. The part number is AM53176 but surfing through posts here I found that other members are successfully using flywheels from Cyclones and Liquifires so that's what I'm looking for. Below are some pictures for reference. Let me know what you have.

Mark

[johnnycyclone]

They are almost identical except the early ones, up to 1975, are flat where the fan pulley, and recoil cup bolt on. The later ones have a raised lip, which you can see in the pic. I have a nice one off of a 76 that I can sell for $25 shipped. You would need to find the fan pulley and recoil cup from a Cyclone or a 75 model year. I don't have any thing else except the flywheel. Feel free to look around to see what you can find.

[johnnycyclone]

Or I guess if you had access to a metal lathe, or bridge port you could mill off the lip.

[tieszo6]

I'm able to machine the lip off so I think that will work just fine. Can you PayPal you $25?

Thanks
Mark

[johnnycyclone]

PM sent.