JD sled rotisserie

Liquifire 4/6 · Post by **Liquifire 4/6** » Tue Jul 03, 2018 5:52 pm

I recently acquired an old John Deere snowmobile rotisserie. It is supposed to be totally complete but is disassembled. I think I should be able to figure out how it goes together but it would have been nice if it had come with some instructions. Has anybody heard of JD sled rotisseries? Not sure if I'll use it much and might decide to part with it if I don't. I don't have any pictures handy right at the moment.

Post by **WinnipegStPaul9** » Wed Jul 04, 2018 7:42 am

Peter, it is featured in some of the earlier service manuals. Follow this link and go to page 60 to see the JDST-24 Stand. Dealer Cost was $161.00. http://vintagesnow.com/John_Deere_files ... xtbook.pdf

DA

nick80lf · Post by **nick80lf** » Wed Jul 04, 2018 6:45 pm

My local dealer had one. I pretty sure one of the guys that worked there ended up with it.

Sent from my HTC One A9 using Tapatalk

Steven Rempel · Post by **Steven Rempel** » Wed Jul 04, 2018 9:28 pm

If you decide to get ride of if pls let me know. I would be very interested in one.

Post by **Matt** » Fri Jul 06, 2018 5:32 pm

I believe Horicon Joe has one.

Steven Rempel · Post by **Steven Rempel** » Fri Jul 06, 2018 9:46 pm

can you post some pics pls

Liquifire 4/6 · Post by **Liquifire 4/6** » Sat Jul 07, 2018 12:01 am

Thanks for the info, guys. I’m away for a few days but will try to get some pic posted when I get back.

Liquifire 4/6 · Post by **Liquifire 4/6** » Sat Jul 07, 2018 12:04 am

Steven, are you within reasonable driving distances of Roblin MB? If so we could possibly work something out. It’s way too big and heavy to ship at a reasonable price. And I’m still not certain if I should let it go.

Steven Rempel · Post by **Steven Rempel** » Sun Jul 08, 2018 2:00 am

yes well within driving distance for me only 4.5 hr one way. but decide frist what your plan for it is, dont get rid of it before letting me know though. no rush/pressure. Just always wanted one as I have 18 sleds and at some point I will make one or buy one. So let me know what you come up with and what you would want for it. if you go that the route. but ya post some pics I have asked in the past if any one has more pics but to no avail.

Liquifire 4/6 · Post by **Liquifire 4/6** » Mon Jul 09, 2018 11:29 am

I put it together this morning and it was pretty self explanatory to assemble. Now that I see how it works, it looks like it could come in real handy for a couple projects I will be doing this winter so I am going to hold onto it until next spring. Probably would be willing to part with it then. Here are some pics of it.

Steven Rempel · Post by **Steven Rempel** » Mon Jul 09, 2018 9:10 pm

looks good thanks for sharing.

AirborneX4Special · Post by **AirborneX4Special** » Mon Jul 09, 2018 9:59 pm

Doesn't look terribly difficult to replicate with a few measurements, some steel, and a couple hand crank winches.

Horicon Joe · Post by **Horicon Joe** » Wed Aug 22, 2018 12:13 pm

I have been using this boat lift for years.
Joe

JD sled rotisserie

JD sled rotisserie

Re: JD sled rotisserie

Re: JD sled rotisserie

Re: JD sled rotisserie

Re: JD sled rotisserie

Re: JD sled rotisserie

Re: JD sled rotisserie

Re: JD sled rotisserie

Re: JD sled rotisserie

Re: JD sled rotisserie

Re: JD sled rotisserie

Re: JD sled rotisserie

Re: JD sled rotisserie