Search found 58 matches
- Sun Sep 20, 2015 5:25 pm
- Forum: Other Brands
- Topic: 1995 Polaris XCR 600 Suspension
- Replies: 2
- Views: 4245
1995 Polaris XCR 600 Suspension
Does any one know if a skid from a 1996 xcr will fit in the 1995 xcr. The one from the 96 is called an xtra 10 and the 95 is an xc-101. I tried to put the skid from the 96 in and cant get back holes to line up. if i take the xtra 10 rear swing arm off and install the 95 rear swing into the 96 skid i...
- Tue Nov 04, 2014 7:49 pm
- Forum: Other Brands
- Topic: Polaris triple dash console
- Replies: 0
- Views: 229
Polaris triple dash console
In some photos and videos ive seen polaris made a triple dash console for the indy chasis. I have a 96 ultra triple and am looking for that guage pod. does any one know where i can find one?
- Tue Jan 08, 2013 12:02 am
- Forum: Other Brands
- Topic: Yamaha Srv 540
- Replies: 9
- Views: 1505
Re: Yamaha Srv 540
I figured the problem out guys it was a bad stator. The wires had melted together and must have been shorting out. I replaced the coils and all is good now.
- Sun Jan 06, 2013 10:55 pm
- Forum: Other Brands
- Topic: Yamaha Srv 540
- Replies: 9
- Views: 1505
Yamaha Srv 540
Hi I recently got a yamaha srv 540 snowmobile. The problem I have with it is that it runs in reverse any ideas on how to fix this?
- Mon Nov 12, 2012 8:52 pm
- Forum: Classifieds
- Topic: 1980 trailfire jet needle
- Replies: 0
- Views: 928
1980 trailfire jet needle
Looking for a 6F27-3 jet needle for 80 trailfire.
- Sun Nov 11, 2012 10:20 am
- Forum: Classifieds
- Topic: 1980 Trail fire drive shaft
- Replies: 2
- Views: 166
1980 Trail fire drive shaft
looking for a drive shaft for 80 trail fire
- Sun Nov 11, 2012 10:18 am
- Forum: Kawasaki Tech Talk
- Topic: 1980 trailfire question
- Replies: 1
- Views: 234
1980 trailfire question
1. what would cause the idle to fluctuate up and down when running. i did notice the carb had the wrong jet needle and replace it.
- Mon Nov 05, 2012 7:02 pm
- Forum: General Talk
- Topic: Striped screws
- Replies: 3
- Views: 310
Re: Striped screws
Vice grips work good too.
- Sun Nov 04, 2012 9:08 pm
- Forum: Classifieds
- Topic: Parting 76 Liqufire 340.
- Replies: 0
- Views: 1078
Parting 76 Liqufire 340.
Let me know what parts you need theres a complete sled here minus the clutch and seat. Ill sell the parts cheap just trying to get rid of it.
Jason
Jason
- Sun Nov 04, 2012 4:26 pm
- Forum: Classifieds
- Topic: Needed 82 Liqufire track
- Replies: 1
- Views: 188
Needed 82 Liqufire track
Hey guy's im looking for a good usable 82 liqufire track for a decent price thanks.
Jason.
Jason.
- Sun Oct 28, 2012 9:36 pm
- Forum: Classifieds
- Topic: 80 Trailfire track.
- Replies: 1
- Views: 230
80 Trailfire track.
I am in need of an 80 trailfire track if any one has one please let me know.
Thanks
Jason
Thanks
Jason
- Fri Oct 26, 2012 7:05 pm
- Forum: Other Brands
- Topic: Kawisaki Invader
- Replies: 2
- Views: 541
Re: Kawisaki Invader
Yes it has the invader hood sorry I forgot to post that, And thats what im beginning to think too that it is the cdi box.
- Wed Oct 24, 2012 8:31 pm
- Forum: Other Brands
- Topic: Kawisaki Invader
- Replies: 2
- Views: 541
Kawisaki Invader
Ok im gonna start at the begining with this sled, This sled was an intruder with a blown motor so I removed the 440 fan cooled motor and put in my 440 liquid cooled motor with new pistons and rings and seals all the way threw it also it has 36 mm carbs 'Mukinis' all the right jets. Welded mounts for...
- Sat Sep 22, 2012 10:34 pm
- Forum: Classifieds
- Topic: WANTED: 3.5 throttle valves and 6dh22 needles
- Replies: 3
- Views: 275
WANTED: 3.5 throttle valves and 6dh22 needles
I have a set of liquifire carbs for 82 with the wrong throttle valves and needles. Manual calls for 3.5 throttle valves and 6DH22 for the needles. These carbs have 2.5 throttle valves and 6dh7 needles in them. Last year sled bogged real bad.
- Tue Jul 10, 2012 4:27 pm
- Forum: Classifieds
- Topic: Liqufire 440 $500
- Replies: 1
- Views: 304
Liqufire 440 $500
I have a 1982 liqufire 440 has rebuilt motor runs great. $500 sled is located in iowa.