Track Question
- WinnipegStPaul9
- Posts: 5577
- Joined: Sat Jul 23, 2005 12:00 am
- Real Name: Don Amber
- Location: Churubusco, IN
Track Question
Does a Yokahama rubber track with AM54757 mean anything to you?
DA
DA
Feel free to check out our website www.buscobullet.com for restorations or parts.
-
- Posts: 561
- Joined: Wed Mar 12, 2008 12:00 am
- Real Name: Jerry Zebro
- Location: Ridgeland WI
Re: Track Question
78 Cross Country?
Old sleds are hours of entertainment.... then you get to ride them for a little bit.
Re: Track Question
Cross country shows up as AM54336, unless it's a substitute. Can't find it anywhere.
- JoeRainville
- Posts: 4355
- Joined: Tue Aug 02, 2005 12:00 am
- Real Name: "John Deere Joe"
- Location: Fort Worth, Texas
- Contact:
Re: Track Question
Don,
Only three Deere sleds used a Yokahama rubber track: 78 CC, and the 80-84 Liquifire and 82-84 Sports. Only the CC was 121" vs 116" for the 80-84 sleds, and all used a 3.29" drive sprocket pitch.
I hope this helps, as I dont' have my parts books to dig any deeper.
-Joe
Only three Deere sleds used a Yokahama rubber track: 78 CC, and the 80-84 Liquifire and 82-84 Sports. Only the CC was 121" vs 116" for the 80-84 sleds, and all used a 3.29" drive sprocket pitch.
I hope this helps, as I dont' have my parts books to dig any deeper.
-Joe
Honorary Tech Editor
Chuck Norris doesn't get frost bite. He bites the frost.
Chuck Norris doesn't get frost bite. He bites the frost.
- WinnipegStPaul9
- Posts: 5577
- Joined: Sat Jul 23, 2005 12:00 am
- Real Name: Don Amber
- Location: Churubusco, IN
Re: Track Question
No this isn't a CC. A buddy found a 76 LF ( SN J340LE058975M) with a rubber track with AM54757 molded in. I cannot find that number in the parts book. Nothing else about this sled is out of the norm. Just looks like someone put a rubber track (and triple drive) in this sled. There is a molded date of 01-79 in the track as well. He did also say that the tunnel had been redrilled for the suspension.
Feel free to check out our website www.buscobullet.com for restorations or parts.
- JoeRainville
- Posts: 4355
- Joined: Tue Aug 02, 2005 12:00 am
- Real Name: "John Deere Joe"
- Location: Fort Worth, Texas
- Contact:
Re: Track Question
Don, sounds like an 80 Liquifire track to me. Not sure what is up with the p/n, but if you haven't figured it out by next weekend, I will take a look in the first run of the 80 LF parts book.
-Joe
PS: Punch Bob for me. Then tell him hello if you like
-Joe
PS: Punch Bob for me. Then tell him hello if you like
Honorary Tech Editor
Chuck Norris doesn't get frost bite. He bites the frost.
Chuck Norris doesn't get frost bite. He bites the frost.
- jdrob
- Posts: 1212
- Joined: Thu Feb 25, 2010 1:23 pm
- Real Name: Rob
- Location: Pennsylvania/OHIO border
Re: Track Question
Don did you do a search here in the archives or older posts ? For some reason that number sounds familiar ??
Jdrob
"Two things are infinite: the universe and human stupidity; and I'm not sure about the universe." AE
"Two things are infinite: the universe and human stupidity; and I'm not sure about the universe." AE
- Sprailfire340
- Posts: 925
- Joined: Tue Oct 07, 2008 12:00 am
- Location: Rockford, MN
Re: Track Question
Kenny was chasing this info at one time too.
http://www.jdsleds.com/community/viewto ... 757#p35807
http://www.jdsleds.com/community/viewto ... 757#p35807
ME
- jdrob
- Posts: 1212
- Joined: Thu Feb 25, 2010 1:23 pm
- Real Name: Rob
- Location: Pennsylvania/OHIO border
Re: Track Question
Thanks Mitch I knew I had saw that number in the past!
Jdrob
"Two things are infinite: the universe and human stupidity; and I'm not sure about the universe." AE
"Two things are infinite: the universe and human stupidity; and I'm not sure about the universe." AE
-
- Posts: 155
- Joined: Sat May 02, 2009 2:55 pm
- Location: palisade, mn
Re: Track Question
I'm glad to know that I'm not the only one who has found that part number track
Grumpy & still in MN for at least another week
Grumpy & still in MN for at least another week
Chris Dotzler
Palisade, MN
to many old sled...so little time!!!
Palisade, MN
to many old sled...so little time!!!
-
- Posts: 5
- Joined: Tue Oct 16, 2012 8:33 am
- Location: Wisconsin
Re: Track Question
Hello All,
New to the site and have just bought a '80 Liquifire to restore. Saw this thread and thought I would ask a question. Is there an after market track that will fit my liquifire? Is there a place I can find the specs for the liquifire tracks so that I could try to find one that is close?
Thank,
New to the site and have just bought a '80 Liquifire to restore. Saw this thread and thought I would ask a question. Is there an after market track that will fit my liquifire? Is there a place I can find the specs for the liquifire tracks so that I could try to find one that is close?
Thank,
- WinnipegStPaul9
- Posts: 5577
- Joined: Sat Jul 23, 2005 12:00 am
- Real Name: Don Amber
- Location: Churubusco, IN
Re: Track Question
First of all, WELCOME!!!!! Secondly, I'm betting there are numerous really good used tracks in your neck of the woods and most prices are very reasonable.. The track used on the LF's are pretty durable. Best of luck and again, welcome on board.
DA
DA
Feel free to check out our website www.buscobullet.com for restorations or parts.