340 rs2 motor ser#4200410

flames4555 · Post by **flames4555** » Tue Feb 12, 2013 2:06 pm

First time offering my 340s motor. I had been saving this motor to possibly mate it with a 340s chassis at some point , but priorities have changed and it would make the most sense to get it the hands of another JD person that has an immediate use for it. It's fairly complete only missing an ignition coil and the recoil . The engine shroud is in fair condition with cracks in the usual places and I'm not sure of the condition of the cdi It has 120lbs compression per cylinder and I removed the exhaust manifold to try and get some pictures of the cylinder walls and pistons. I'm about 20 miles north of Boston mass and would prefer to have it picked up , but will look into shipping it if need be. I did my best to show the overall condition of the motor but don't hesitate to ask questions. I originally obtained the motor when I bought my cyclone and haven't done anything with it other than keep the cylinders oiled and take these pictures. I had asked around a bit on pricing and have to decided to ask $550.00 OBO . Please don't hesitate to PM me with your thoughts....

flames4555 · Post by **flames4555** » Wed Feb 27, 2013 9:02 pm

I'm certainly open to offers ....pm me if you are interested

feere the deere · Post by **feere the deere** » Thu Feb 28, 2013 2:29 pm

Hi, did you get my PM

flames4555 · Post by **flames4555** » Thu Feb 28, 2013 3:22 pm

No I didn't , I will pm you as a test ....

flames4555 · Post by **flames4555** » Thu Feb 28, 2013 9:32 pm

looks like my pm is stuck in my outbox...will have get a moderator to check into it ...

Post by **Matt** » Thu Feb 28, 2013 9:42 pm

PMs stay in the outbox until the person receiving it reads it.

flames4555 · Post by **flames4555** » Thu Feb 28, 2013 9:43 pm

thanks !!

feere the deere · Post by **feere the deere** » Fri Mar 01, 2013 2:37 pm

Hey I figured it out, PM sent

flames4555 · Post by **flames4555** » Thu Mar 07, 2013 9:42 pm

flames4555 · Post by **flames4555** » Fri Mar 08, 2013 10:30 am

Sale pending ....

flames4555 · Post by **flames4555** » Mon Mar 11, 2013 4:06 pm

Sold .... thanks to everyone that inquired and the use of the site

Kevin

340 rs2 motor ser#4200410

340 rs2 motor ser#4200410

Re: 340 rs2 motor ser#4200410

Re: 340 rs2 motor ser#4200410

Re: 340 rs2 motor ser#4200410

Re: 340 rs2 motor ser#4200410

Re: 340 rs2 motor ser#4200410

Re: 340 rs2 motor ser#4200410

Re: 340 rs2 motor ser#4200410

Re: 340 rs2 motor ser#4200410

Re: 340 rs2 motor ser#4200410

Re: 340 rs2 motor ser#4200410