Can anyone tell me what secondary clutch they ran in the Direct Drive Deere sleds and the diameter of the sheaves?
Always wondered if they were larger than what a later model Liquifire had........
Direct Drive Secondary Clutch Diameter
- JoeRainville
- Posts: 4355
- Joined: Tue Aug 02, 2005 12:00 am
- Real Name: "John Deere Joe"
- Location: Fort Worth, Texas
- Contact:
Re: Direct Drive Secondary Clutch Diameter
Hello Ski,
I don't have any DD sleds moved down to TX from NY yet, but they are significantly larger in diameter than the secondary used on the Liquifire. I think the LF is something like 10.5" and the DD driven is around 12" in diamter. I have LF's here I can measure if needed.
-Joe
I don't have any DD sleds moved down to TX from NY yet, but they are significantly larger in diameter than the secondary used on the Liquifire. I think the LF is something like 10.5" and the DD driven is around 12" in diamter. I have LF's here I can measure if needed.
-Joe
Honorary Tech Editor
Chuck Norris doesn't get frost bite. He bites the frost.
Chuck Norris doesn't get frost bite. He bites the frost.
Re: Direct Drive Secondary Clutch Diameter
Thanks Joe...Just curious if it is adaptable to a Cyclone..??