electric start
-
vandeursen
electric start
is it possable to set up electric start on a 1980 jd liquifire if so what would i need?
electric start
I'm doing it right now on my 83 TF, here's what I've accumulated:
NOS Battery box
NOS Wiring (key to circuit breaker/solenoid)
New Key/Switch
New Starter
NOS Circuit Breaker
New Solenoid
NOS rectifier
Grab yourself a copy of the liquifire parts manual, I also purchased the tech manual which has been a big help on a number of things. See the FAQ forum for the phone number to JD Publications.
I've made a few of my own wires and have bought a few others as they are still available from JD. Make a list of the part #'s you need and head to the jd dealer, watch dk-trader on ebay, post on the classifieds page, you'll get everything you need.
Good luck and have fun!
NOS Battery box
NOS Wiring (key to circuit breaker/solenoid)
New Key/Switch
New Starter
NOS Circuit Breaker
New Solenoid
NOS rectifier
Grab yourself a copy of the liquifire parts manual, I also purchased the tech manual which has been a big help on a number of things. See the FAQ forum for the phone number to JD Publications.
I've made a few of my own wires and have bought a few others as they are still available from JD. Make a list of the part #'s you need and head to the jd dealer, watch dk-trader on ebay, post on the classifieds page, you'll get everything you need.
Good luck and have fun!
electric start
Ive done it too, the positive batt cable that goes from batt to solenoid is still available from JD as well as the circuit breaker and the jumper wire that goes from the circuit breaker to the solenoid. youll have to make your own positive cable and negative cable (to starter) easily done....any parts store carries the cable and eyelets.