rubber bushing for fuel tank

This is where you can post the story & photos of your John Deere Snowmobile project.
Post Reply
marshall_b
Posts: 30
Joined: Sun Nov 16, 2008 1:00 am
Location: ohio

rubber bushing for fuel tank

Post by marshall_b »

Was wonderinf wear you guys been getting the rubber bushings for the fuel tank wear the fuel line runs threw in need of some
ljm
Posts: 705
Joined: Tue Jan 26, 2010 10:05 am
Real Name: Lloyd
Location: near Port Elgin, Ontario

Re: rubber bushing for fuel tank

Post by ljm »

Local JD dealer ( just don't ask for snowmobile parts. It is used on many things still), New Breed parts and most aftermarket parts suppliers, Same bushing is used on Lots of different brands.

JD part number M149638 still good
Several Deere's
Several Kawasaki's

ACSCC #1534
User avatar
WinnipegStPaul9
Posts: 5577
Joined: Sat Jul 23, 2005 12:00 am
Real Name: Don Amber
Location: Churubusco, IN

Re: rubber bushing for fuel tank

Post by WinnipegStPaul9 »

Marshall, I have a couple if you don't have time to look. Just send me your address again. Anything new on the hoods or other parts?

DA
Feel free to check out our website www.buscobullet.com for restorations or parts.
JDT
Posts: 5561
Joined: Wed Nov 21, 2007 1:00 am
Real Name: Todd
Location: Milbank South Dakota

Re: rubber bushing for fuel tank

Post by JDT »

I think Matt has these at NBP.
Todd Schrupp

Milbank SD
Matt
Posts: 4747
Joined: Wed Jul 13, 2005 12:00 am
Real Name: Matt
Location: Coopersburg, PA
Contact:

Re: rubber bushing for fuel tank

Post by Matt »

http://www.newbreedparts.com/newbreed/i ... duct_id=89

I know it says out of stock but I do have some.
:usa: Matt - JDsleds.com Administrator
marshall_b
Posts: 30
Joined: Sun Nov 16, 2008 1:00 am
Location: ohio

Re: rubber bushing for fuel tank

Post by marshall_b »

Mat what do I do since it says that they are out of stock? I would like to get at least 5 if i can
DAi am going to make the cyclone and the 78 liqufire and the 78 hood vent they just got set back a little been having to work a ton of hours
Matt
Posts: 4747
Joined: Wed Jul 13, 2005 12:00 am
Real Name: Matt
Location: Coopersburg, PA
Contact:

Re: rubber bushing for fuel tank

Post by Matt »

You can still place the order. It's just going to tell you we don't have them, but I do.
:usa: Matt - JDsleds.com Administrator
marshall_b
Posts: 30
Joined: Sun Nov 16, 2008 1:00 am
Location: ohio

Re: rubber bushing for fuel tank

Post by marshall_b »

Thinks matt
User avatar
WinnipegStPaul9
Posts: 5577
Joined: Sat Jul 23, 2005 12:00 am
Real Name: Don Amber
Location: Churubusco, IN

Re: rubber bushing for fuel tank

Post by WinnipegStPaul9 »

marshall_b wrote:Mat what do I do since it says that they are out of stock? I would like to get at least 5 if i can
DAi am going to make the cyclone and the 78 liqufire and the 78 hood vent they just got set back a little been having to work a ton of hours
Thanks Marshall, can't wait to see the finished product.

DA
Feel free to check out our website www.buscobullet.com for restorations or parts.
User avatar
pwgsx
Posts: 109
Joined: Tue Feb 05, 2013 10:21 am
Location: Texas

Re: rubber bushing for fuel tank

Post by pwgsx »

Send me your address, I got a new one you can have. :beers;
Post Reply