For some time I have been considering purchasing an inductive tachometer. Just wondering if anyone has any recommendations. I'm looking for something that would be really versatile and can be used on 2 cycle, 4 cycle, single to multiple cylinder engines.
So far I have been bumming a "tiny tach" / hour meter from my brother when I need a tach. This is the older model that you can't select the number of sparks per revolution, so there's always some easy math involved with it's use.
Sent from my HTC One_M8 using Tapatalk
Suggestions for inductive tachometer
-
nick80lf
- Posts: 1159
- Joined: Thu Jan 14, 2010 10:45 pm
- Real Name: Nick
- Location: The snow free zone of Ohio
Suggestions for inductive tachometer
80 Liquifire (purchased 1996 ~ Running)
80 Liquifire (purchased 2010 ~ Running....Now)
80 Liquifire (purchased 2011 ~ Not running - I officially have a problem now)
83 Snowfire (purchased 2014 father/son restoration project)
78 Spitfire ~ sold (should have been shot for this)
80 Liquifire (purchased 2010 ~ Running....Now)
80 Liquifire (purchased 2011 ~ Not running - I officially have a problem now)
83 Snowfire (purchased 2014 father/son restoration project)
78 Spitfire ~ sold (should have been shot for this)
Re: Suggestions for inductive tachometer
I have this one from Snap On, it works very well.
https://store.snapon.com/Tachometers-Ta ... 49404.aspx
https://store.snapon.com/Tachometers-Ta ... 49404.aspx
1980 Liquifire owned since new
1980 Liquifire
1984 Trailfire LX
1982 Liquifire
1983 Liquifire
1980 Liquifire
1984 Trailfire LX
1982 Liquifire
1983 Liquifire
Re: Suggestions for inductive tachometer
I have two from tachs from Electronic Specialties, the EZ Tach+ (inductive) and the Pro Laser contact tach. I am happy with both but the response time of the inductive tach is a little slow. The laser/contact tach is nice since it's a little more multi-functional as you can read any shaft speed by putting on a reflective strip or by using the included rubber tips.
http://www.esitest.com/
Mark
http://www.esitest.com/
Mark
-
ICCSF 108
- Posts: 4369
- Joined: Sun Jul 17, 2005 12:00 am
- Real Name: Kenny Heins, AKA Grumpy
- Location: Blue Springs Mo.
- Contact:
Re: Suggestions for inductive tachometer
Are there any hand held Digital Tachs out there that can be used on 1-2-3-4 Cly. 2-stroke engines? I'd like one to be nuts on accurate just to test verify how far off the OEM or aftermarket tachs are off.... Must be able to work on the early Deeres CDI to the Newer later sleds.. I suspect this laser one ( Pro Laser contact Tach ) like tieszo6 is talking about would work the best as it's taking shaft speeds? Are there others out there?
Grumpy
Grumpy
AKA: Kenny, Grumpy, Mr. Richard Head
"I Hunt For it, Purchase it, Haul it, Sometimes Repair it, Sometimes Break it, Then Fix it Again, Label it, Warehouse it, Talk About it, So NOW, HOW Can I Take Any Less $$ For It?"
"God I love the smell of KLOTZ in the morning, That smell, you know that Gasoline/Oil Smell, MAKES the whole place SMELL like.. LIKE VICTORY. You know someday the 2 strokers are gonna end..."
Do Anti-War Protesters have reunions? If so what do they TALK about?
"I Hunt For it, Purchase it, Haul it, Sometimes Repair it, Sometimes Break it, Then Fix it Again, Label it, Warehouse it, Talk About it, So NOW, HOW Can I Take Any Less $$ For It?"
"God I love the smell of KLOTZ in the morning, That smell, you know that Gasoline/Oil Smell, MAKES the whole place SMELL like.. LIKE VICTORY. You know someday the 2 strokers are gonna end..."
Do Anti-War Protesters have reunions? If so what do they TALK about?
-
ICCSF 108
- Posts: 4369
- Joined: Sun Jul 17, 2005 12:00 am
- Real Name: Kenny Heins, AKA Grumpy
- Location: Blue Springs Mo.
- Contact:
Re: Suggestions for inductive tachometer
This probably should be moved to the General Talk Section as I'm sure it's going to get very interesting!!!!!
Grumpy
Grumpy
AKA: Kenny, Grumpy, Mr. Richard Head
"I Hunt For it, Purchase it, Haul it, Sometimes Repair it, Sometimes Break it, Then Fix it Again, Label it, Warehouse it, Talk About it, So NOW, HOW Can I Take Any Less $$ For It?"
"God I love the smell of KLOTZ in the morning, That smell, you know that Gasoline/Oil Smell, MAKES the whole place SMELL like.. LIKE VICTORY. You know someday the 2 strokers are gonna end..."
Do Anti-War Protesters have reunions? If so what do they TALK about?
"I Hunt For it, Purchase it, Haul it, Sometimes Repair it, Sometimes Break it, Then Fix it Again, Label it, Warehouse it, Talk About it, So NOW, HOW Can I Take Any Less $$ For It?"
"God I love the smell of KLOTZ in the morning, That smell, you know that Gasoline/Oil Smell, MAKES the whole place SMELL like.. LIKE VICTORY. You know someday the 2 strokers are gonna end..."
Do Anti-War Protesters have reunions? If so what do they TALK about?
-
nick80lf
- Posts: 1159
- Joined: Thu Jan 14, 2010 10:45 pm
- Real Name: Nick
- Location: The snow free zone of Ohio
Re: Suggestions for inductive tachometer
I haven't purchased one yet but these are the 2 that I find the most interesting
http://www.esitest.com/321.html
Here's a youtube video of it operating https://www.youtube.com/watch?v=pmA0b5e7Akw
http://www.oppama.co.jp/eng/line/line1.html
Here's a youtube video of one of the oppoma units https://www.youtube.com/watch?v=EpkvxH_vOzU
http://www.esitest.com/321.html
Here's a youtube video of it operating https://www.youtube.com/watch?v=pmA0b5e7Akw
http://www.oppama.co.jp/eng/line/line1.html
Here's a youtube video of one of the oppoma units https://www.youtube.com/watch?v=EpkvxH_vOzU
80 Liquifire (purchased 1996 ~ Running)
80 Liquifire (purchased 2010 ~ Running....Now)
80 Liquifire (purchased 2011 ~ Not running - I officially have a problem now)
83 Snowfire (purchased 2014 father/son restoration project)
78 Spitfire ~ sold (should have been shot for this)
80 Liquifire (purchased 2010 ~ Running....Now)
80 Liquifire (purchased 2011 ~ Not running - I officially have a problem now)
83 Snowfire (purchased 2014 father/son restoration project)
78 Spitfire ~ sold (should have been shot for this)