Knocking around the idea of reproducing dator pipes. I made models from factory prints. Could possibly make them to fit
a 340 Liquifire motor as well. Let me know what you guys think?
Joe
ANY INTEREST IN DATOR PIPES??
-
Horicon Joe
- Posts: 1091
- Joined: Mon Jul 18, 2005 12:00 am
- Real Name: Joe Wanie
- Location: ROLLING PRAIRIE WI
ANY INTEREST IN DATOR PIPES??
- Attachments
-
-
-
-
Please add your Real Name in your User Profile or at least your first Name!
Re: ANY INTEREST IN DATOR PIPES??
Are you planning on making the muffler, as well as the pipes? I would be in for a couple of sets of pipes.
Re: ANY INTEREST IN DATOR PIPES??
Joe I am in ! Brock
-
Cabindweller
- Posts: 561
- Joined: Wed Mar 12, 2008 12:00 am
- Real Name: Jerry Zebro
- Location: Ridgeland WI
Re: ANY INTEREST IN DATOR PIPES??
Yes!
Old sleds are hours of entertainment.... then you get to ride them for a little bit.
-
johndear300
- Posts: 29
- Joined: Mon Jan 14, 2008 1:00 am
Re: ANY INTEREST IN DATOR PIPES??
Two sets ,exhaust silencer being made too?
-
That Girl Racing
- Posts: 683
- Joined: Fri Jul 22, 2005 12:00 am
- Real Name: Peter
Re: ANY INTEREST IN DATOR PIPES??
The original dies are somewhere in Ontario. No one can locate them
-
Horicon Joe
- Posts: 1091
- Joined: Mon Jul 18, 2005 12:00 am
- Real Name: Joe Wanie
- Location: ROLLING PRAIRIE WI
Re: ANY INTEREST IN DATOR PIPES??
I would do the silencer can as well ..... Peter you are correct sir. I know just where they were made and am looking into that as well.
Rough estimate is $1000 for full set.
Joe
Rough estimate is $1000 for full set.
Joe
Please add your Real Name in your User Profile or at least your first Name!
-
69camaro
- Posts: 1427
- Joined: Sat Oct 22, 2005 12:00 am
- Real Name: Duane Gjerseth
- Location: Augusta, Wisconsin (Eau Claire area)
Re: ANY INTEREST IN DATOR PIPES??
Joe, you are amazing in a good way buddy!
75-340/s
76-340 Liquifire
77-440 Liquifire Custom
78-440 Liquifire
84-Liquifire
84-Sportfire
84-Sprintfire
84-Snowfire
78-Polaris TXL
82-Indy 500
91-XC 400
91-Indy 500 Special
94-Indy 440 Special
95-XCR 440 Special
96-XCR 440 Special
99-XC 600
04-XC 700
81-Kawasaki 440 Invader
76-340 Liquifire
77-440 Liquifire Custom
78-440 Liquifire
84-Liquifire
84-Sportfire
84-Sprintfire
84-Snowfire
78-Polaris TXL
82-Indy 500
91-XC 400
91-Indy 500 Special
94-Indy 440 Special
95-XCR 440 Special
96-XCR 440 Special
99-XC 600
04-XC 700
81-Kawasaki 440 Invader
Re: ANY INTEREST IN DATOR PIPES??
I would be in far 2 sets. It would make a clone look a lot closer to an original Dator.
Re: ANY INTEREST IN DATOR PIPES??
would this include the head pipes as well ? would there be a choice of dator motor vs liquifire motor head pipes ? yes in interested is some for sure wade
certificate recipiant of the 12 vintage challenge !! on a 78 liquifre 440,
certificate recipiant of the 13 vintage challenge !! on a 340/s
certificate recipient of the 14 vintage challenge !! on a 78 liquifire 440
joe forgot the certificates for the 2015 vintage challenge
crossed the start/finish line twice at the 2013 and 2014 I500 on a 78 liquifire 440
certificate recipiant of the 13 vintage challenge !! on a 340/s
certificate recipient of the 14 vintage challenge !! on a 78 liquifire 440
joe forgot the certificates for the 2015 vintage challenge
crossed the start/finish line twice at the 2013 and 2014 I500 on a 78 liquifire 440
-
JDCornFlakes
- Posts: 447
- Joined: Tue Apr 04, 2006 12:00 am
- Location: SW Ontario, Canada
Re: ANY INTEREST IN DATOR PIPES??
I will take 2 muffler/silencer cans for sure.
Possibly another complete set of pipes/muffler as well.
Joe , I have to commend you for stepping up to the plate taking on something like this again.
Great of you to do !
Dave
Possibly another complete set of pipes/muffler as well.
Joe , I have to commend you for stepping up to the plate taking on something like this again.
Great of you to do !
Dave
DAVE
From Ontario...That's in Canada not in California eh !
From Ontario...That's in Canada not in California eh !
Re: ANY INTEREST IN DATOR PIPES??
Any updates?
77 440 Liquifire
76 340 Liquifire
76 340 Liquidator
77 340 Liquifire
78 440 Liquifire
76 340 Liquifire
76 340 Liquidator
77 340 Liquifire
78 440 Liquifire
-
ICCSF 108
- Posts: 4369
- Joined: Sun Jul 17, 2005 12:00 am
- Real Name: Kenny Heins, AKA Grumpy
- Location: Blue Springs Mo.
- Contact:
Re: ANY INTEREST IN DATOR PIPES??
Joe, I'd be in for at least one set.
Grumpy
Grumpy
AKA: Kenny, Grumpy, Mr. Richard Head
"I Hunt For it, Purchase it, Haul it, Sometimes Repair it, Sometimes Break it, Then Fix it Again, Label it, Warehouse it, Talk About it, So NOW, HOW Can I Take Any Less $$ For It?"
"God I love the smell of KLOTZ in the morning, That smell, you know that Gasoline/Oil Smell, MAKES the whole place SMELL like.. LIKE VICTORY. You know someday the 2 strokers are gonna end..."
Do Anti-War Protesters have reunions? If so what do they TALK about?
"I Hunt For it, Purchase it, Haul it, Sometimes Repair it, Sometimes Break it, Then Fix it Again, Label it, Warehouse it, Talk About it, So NOW, HOW Can I Take Any Less $$ For It?"
"God I love the smell of KLOTZ in the morning, That smell, you know that Gasoline/Oil Smell, MAKES the whole place SMELL like.. LIKE VICTORY. You know someday the 2 strokers are gonna end..."
Do Anti-War Protesters have reunions? If so what do they TALK about?
-
Horicon Joe
- Posts: 1091
- Joined: Mon Jul 18, 2005 12:00 am
- Real Name: Joe Wanie
- Location: ROLLING PRAIRIE WI
Re: ANY INTEREST IN DATOR PIPES??
Nothing for sure yet. Peter told me that the original tooling was picked up by some Yamaha guys and I need to make sure it doesn't somehow miraculously show up after I am in the middle of the project if I start it.
Joe
Joe
Please add your Real Name in your User Profile or at least your first Name!
-
That Girl Racing
- Posts: 683
- Joined: Fri Jul 22, 2005 12:00 am
- Real Name: Peter
Re: ANY INTEREST IN DATOR PIPES??
I will be seeing the "Yamaha" guys soon. I will ask them then. Don't know how to contact them but they show up at all the local swapmeets