JD 340/s Reproduction Windshields
- JoeRainville
- Posts: 4355
- Joined: Tue Aug 02, 2005 12:00 am
- Real Name: "John Deere Joe"
- Location: Fort Worth, Texas
- Contact:
JD 340/s Reproduction Windshields
Hi Guys,
I am about to place an order for reproduction 340/s windshields. They will be 0.080" thick polycarbonate with edge trim and should be as good or better than the factory originals. The best original OEM windshield was sent out as the model.
I can sell them for $90 each, but the more I order, the better price I can get, and extend to you guys. Let me know if you are interested in purchasing, and how many you want. I will do the best I can on price, and offer at least a small discount or maybe free shipping on the first set of orders.
I would like to place an order within the next week. If this goes well, 295/s short windshields will be next. Let me know if you are interested...
Thank you,
-Joe Rainville
"John Deere Joe Enterprises"
585-406-4593c
joerainville@hotmail.com
I am about to place an order for reproduction 340/s windshields. They will be 0.080" thick polycarbonate with edge trim and should be as good or better than the factory originals. The best original OEM windshield was sent out as the model.
I can sell them for $90 each, but the more I order, the better price I can get, and extend to you guys. Let me know if you are interested in purchasing, and how many you want. I will do the best I can on price, and offer at least a small discount or maybe free shipping on the first set of orders.
I would like to place an order within the next week. If this goes well, 295/s short windshields will be next. Let me know if you are interested...
Thank you,
-Joe Rainville
"John Deere Joe Enterprises"
585-406-4593c
joerainville@hotmail.com
Honorary Tech Editor
Chuck Norris doesn't get frost bite. He bites the frost.
Chuck Norris doesn't get frost bite. He bites the frost.
Re: JD 340/s Reproduction Windshields
Put me down for one. If you need more to make the price cuts I may take another for a spare.
18 and counting
Re: JD 340/s Reproduction Windshields
I'm in for 3 . Brock
-
- Posts: 29
- Joined: Fri Nov 15, 2013 2:05 am
- Real Name: Scott
- Location: Saskatchewan
Re: JD 340/s Reproduction Windshields
I'll take one for sure.. with shipping to Canada if that's alright. Thanks
-
- Posts: 204
- Joined: Mon Dec 30, 2013 8:03 pm
- Real Name: Lincoln Huffman
- Location: Michigan
Re: JD 340/s Reproduction Windshields
I will take one. Thanks lincoln
2015 vintage challenge finisher on 81 liquifire
2016 vintage challenge finisher on a wounded 83 Liquifire
2016 vintage challenge finisher on a wounded 83 Liquifire
- JoeRainville
- Posts: 4355
- Joined: Tue Aug 02, 2005 12:00 am
- Real Name: "John Deere Joe"
- Location: Fort Worth, Texas
- Contact:
Re: JD 340/s Reproduction Windshields
I would like to thank everyone for the quick responses. Looks like I have plenty of pre-orders to kick this off, and will be submitting the first order this Friday. I will also order extra's and try to keep some in inventory. Again, thank you for supporting this project.
-Joe Rainville
-Joe Rainville
Honorary Tech Editor
Chuck Norris doesn't get frost bite. He bites the frost.
Chuck Norris doesn't get frost bite. He bites the frost.
Re: JD 340/s Reproduction Windshields
I will take 2. Thanks!
- JoeRainville
- Posts: 4355
- Joined: Tue Aug 02, 2005 12:00 am
- Real Name: "John Deere Joe"
- Location: Fort Worth, Texas
- Contact:
Re: JD 340/s Reproduction Windshields
Hi Guys,
The first order of 20 reproduction 340/s windshields has shipped from the manufacturer today. Once in hand, I will invoice everyone in order. Free shipping on this first set as a bonus for helping justify the investment.
As soon as I have these in hand, I am sending them an original 295/s windshield to reproduce. Aside from the 295/s they will also fit all the JDX and 100 series sleds if someone wants a custom look. One person asked about smoked 295/s windshields, so please let me know if anyone is interested in those too.
Thanks again everyone, couldn't have done this without your support.
-Joe Rainville
The first order of 20 reproduction 340/s windshields has shipped from the manufacturer today. Once in hand, I will invoice everyone in order. Free shipping on this first set as a bonus for helping justify the investment.
As soon as I have these in hand, I am sending them an original 295/s windshield to reproduce. Aside from the 295/s they will also fit all the JDX and 100 series sleds if someone wants a custom look. One person asked about smoked 295/s windshields, so please let me know if anyone is interested in those too.
Thanks again everyone, couldn't have done this without your support.
-Joe Rainville
Honorary Tech Editor
Chuck Norris doesn't get frost bite. He bites the frost.
Chuck Norris doesn't get frost bite. He bites the frost.
Re: JD 340/s Reproduction Windshields
How about sport height shields for the 80's fire sleds?? Just wondering? Thanks.
- JoeRainville
- Posts: 4355
- Joined: Tue Aug 02, 2005 12:00 am
- Real Name: "John Deere Joe"
- Location: Fort Worth, Texas
- Contact:
Re: JD 340/s Reproduction Windshields
Hi Monte,
After the 340/s and 295/s windshields are done, we are looking at what to do next.
Suggestions are always welcome. So far folks have inquired about the short Dator and the tall 78 Liquifire/Cyclone windshield, the short "sport" for the Liquifire/Trail/Sportfires. However if Kimpex or Snow Stuff is already making a certain windshield, we may shy away from that and focus on ones you can't currently purchase elsewhere.
Thanks,
-Joe
After the 340/s and 295/s windshields are done, we are looking at what to do next.
Suggestions are always welcome. So far folks have inquired about the short Dator and the tall 78 Liquifire/Cyclone windshield, the short "sport" for the Liquifire/Trail/Sportfires. However if Kimpex or Snow Stuff is already making a certain windshield, we may shy away from that and focus on ones you can't currently purchase elsewhere.
Thanks,
-Joe
Honorary Tech Editor
Chuck Norris doesn't get frost bite. He bites the frost.
Chuck Norris doesn't get frost bite. He bites the frost.
- JoeRainville
- Posts: 4355
- Joined: Tue Aug 02, 2005 12:00 am
- Real Name: "John Deere Joe"
- Location: Fort Worth, Texas
- Contact:
Re: JD 340/s Reproduction Windshields
Gentleman,
The first order of new 340/s reproduction windshields has arrived and test fit. Compared to the original Deere unit, the JDR (John Deere Replacement) unit fits just as well as the factory piece. I found a plastic mallet worked well to tap it in place. I left the screws around the headlight loose until all 6 were in place and then tightened them up.
As I said originally, I am covering shipping on this first order to say "thanks" to the guys that pre-ordered. I will be filling requests in the order they were received. These will be $90 each. I can accept paypal at: joerainville@hotmail.com
Thank you,
-Joe
585-406-4593c
joerainville@hotmail.com
PS: I am getting a quote for 295/s windshields next. Please let me know if you are interested in a clear or potentially a smoked one. Aside from the 295/s, these low units should fit all the other 73-77 JDX and 100 series machines too.
The first order of new 340/s reproduction windshields has arrived and test fit. Compared to the original Deere unit, the JDR (John Deere Replacement) unit fits just as well as the factory piece. I found a plastic mallet worked well to tap it in place. I left the screws around the headlight loose until all 6 were in place and then tightened them up.
As I said originally, I am covering shipping on this first order to say "thanks" to the guys that pre-ordered. I will be filling requests in the order they were received. These will be $90 each. I can accept paypal at: joerainville@hotmail.com
Thank you,
-Joe
585-406-4593c
joerainville@hotmail.com
PS: I am getting a quote for 295/s windshields next. Please let me know if you are interested in a clear or potentially a smoked one. Aside from the 295/s, these low units should fit all the other 73-77 JDX and 100 series machines too.
Honorary Tech Editor
Chuck Norris doesn't get frost bite. He bites the frost.
Chuck Norris doesn't get frost bite. He bites the frost.
- JoeRainville
- Posts: 4355
- Joined: Tue Aug 02, 2005 12:00 am
- Real Name: "John Deere Joe"
- Location: Fort Worth, Texas
- Contact:
Re: JD 340/s Reproduction Windshields
We also checked out the original Deere and the reproduction unit on an original JD fiberglass hood. It appears that the mounting tab slots in the hood were opened up. With the top two screws in place, there is some misalignments with the other holes. There may be some adjustments needed for installing them on the original Deere and reproduction glass hood. Again, I would suggest leaving the screws finger tight and getting them all started before tightening them down, especially on the glass hoods.
Note the attached pic's show the original Deere windshield on the factory glass replacement hood. The reproduction windshield fit the exact same way.
Thanks,
-Joe
Note the attached pic's show the original Deere windshield on the factory glass replacement hood. The reproduction windshield fit the exact same way.
Thanks,
-Joe
Honorary Tech Editor
Chuck Norris doesn't get frost bite. He bites the frost.
Chuck Norris doesn't get frost bite. He bites the frost.
-
- Posts: 1386
- Joined: Sat Dec 14, 2013 3:39 pm
- Real Name: Allan Campbell
- Location: Saint Peter MN
Re: JD 340/s Reproduction Windshields
JDJR Sr. I wish I had a 340s that I could order a windshield lol, but regardless nice job on the initiative!
1975 340/s Speed Run Sled
1975 340/s I500 #161
1980 Liquifire SN# 4995 From WA Speed Run Sled
1980 Liquifire SN# 4996 From MN
1983 Sportfire
1984 Liquifire Deep Snow Tunnel 4/6 motor
1984 Sprintfire (2)
***Duelling Deere Garage***
1975 340/s I500 #161
1980 Liquifire SN# 4995 From WA Speed Run Sled
1980 Liquifire SN# 4996 From MN
1983 Sportfire
1984 Liquifire Deep Snow Tunnel 4/6 motor
1984 Sprintfire (2)
***Duelling Deere Garage***
- JoeRainville
- Posts: 4355
- Joined: Tue Aug 02, 2005 12:00 am
- Real Name: "John Deere Joe"
- Location: Fort Worth, Texas
- Contact:
Re: JD 340/s Reproduction Windshields
Thanks Allen, don't worry Matt, Don and I are working on doing more higher volume ones.
Maynard: Please send me your shipping address so I can get your windshields out. And, thank you for your order!
-Joe Rainville
Maynard: Please send me your shipping address so I can get your windshields out. And, thank you for your order!
-Joe Rainville
Honorary Tech Editor
Chuck Norris doesn't get frost bite. He bites the frost.
Chuck Norris doesn't get frost bite. He bites the frost.
-
- Posts: 43
- Joined: Sat Oct 20, 2012 10:26 pm
- Real Name: Jordan Klonteig
- Location: Chatham, Ontario
Re: JD 340/s Reproduction Windshields
Joe, do you have a picture of the 295/s windshield (even better if its on a '00 series)?
Jordan
-----------------
1-1/2 JD300E's
-----------------
-----------------
1-1/2 JD300E's
-----------------