Liquidator Repop Hoods, 340/s Tool Boxes

JoeRainville · Post by **JoeRainville** » Sun Nov 15, 2015 9:51 pm

Hi Guys,

I have a small order of Liquidator repop hoods going in this week. Does anyone else need one that can arrange pick up at Lee Fredrickson's place, just outside of the twin cities? These are a slightly heavier versions of the "Up-Dator" or "Dator-Lite" hood. The mold was lifted off an NOS Dator-Lite hood, but they do seem a bit tight to the bumper in the middle. These come with all the openings pre-cut, but do not include the hinge bracket that will need to be bonded to then attached a hinge to.

I also reproduce:
340/s back of seat tool box housing
340/s Windshields

Getting a quote for 295/s windshields currently...

Thanks,
-Joe Rainville
joerainville@hotmail.com
585-406-4593 cell

sledhead16 · Post by **sledhead16** » Tue Nov 17, 2015 9:20 pm

Huge on taking the reins on getting these! Thanks!!!!

croyturbo · Post by **croyturbo** » Fri Dec 04, 2015 11:18 am

What will the final price be on the dator hood?

JoeRainville · Post by **JoeRainville** » Mon Dec 07, 2015 11:33 pm

Hello Chris, and guys:

Liquidator Hoods: $400
340/s Tool Box: $60
340/s Windshields: $90

Thanks,
-Joe

Jimmy · Post by **Jimmy** » Tue Dec 08, 2015 12:26 am

Hey Joe, I'll take a tool box for the 340S.

gpuller · Post by **gpuller** » Thu Dec 10, 2015 1:48 pm

What is a good windshield to get? Liquidator windshields were lower than the Cyclone/Liquifire correct?

JoeRainville · Post by **JoeRainville** » Tue Dec 22, 2015 11:39 pm

Jimmy, I will send you and IM for the 340/s tool box.

Gpuller, the Liquidator is the shortest windshield, the 76-77 Liquifire and Cyclone are basically a medium with the 78's being the tallest. I am working with the vendor to get a quote for the 3 sizes currently.

Thanks,
-Joe Rainville

gpuller · Post by **gpuller** » Wed Dec 23, 2015 3:39 pm

JoeRainville wrote:Jimmy, I will send you and IM for the 340/s tool box.

Gpuller, the Liquidator is the shortest windshield, the 76-77 Liquifire and Cyclone are basically a medium with the 78's being the tallest. I am working with the vendor to get a quote for the 3 sizes currently.

Thanks,
-Joe Rainville

Thanks!
I'd like to have the short Liquidator windshield on my Liquifire.

heiner921 · Post by **heiner921** » Thu Dec 24, 2015 8:53 am

I'd take a short one for my 76 cyclone

spudd · Post by **spudd** » Thu Dec 24, 2015 10:22 am

i would take 2 shorts for sure!!!!!!!!!

JoeRainville · Post by **JoeRainville** » Thu Dec 24, 2015 3:55 pm

Thanks for the request guys, I will keep that in mind as the order comes together. Your feed back and requests is very helpful with a project like this.

-Joe

croyturbo · Post by **croyturbo** » Mon Dec 28, 2015 1:33 am

Is it too late to get a hood? Could also use a couple of the short windshields. Please pm with details. Thanks.

JoeRainville · Post by **JoeRainville** » Tue Dec 29, 2015 3:12 am

Hello Chris,

I order the hood as the requests come in. I currently have 20 more 340/s windshields on order, and 20 for the 295/s. Once the 295/s is done, we will start on the 76-78 units including the 76 Dator 'low' one, and we will keep everyone updated here. Thanks for the interests. I will IM you with hood ordering info.

Thanks,
-Joe

Liquidator Repop Hoods, 340/s Tool Boxes

Liquidator Repop Hoods, 340/s Tool Boxes

Re: Liquidator Repop Hoods, 340/s Tool Boxes

Re: Liquidator Repop Hoods, 340/s Tool Boxes

Re: Liquidator Repop Hoods, 340/s Tool Boxes

Re: Liquidator Repop Hoods, 340/s Tool Boxes

Re: Liquidator Repop Hoods, 340/s Tool Boxes

Re: Liquidator Repop Hoods, 340/s Tool Boxes

Re: Liquidator Repop Hoods, 340/s Tool Boxes

Re: Liquidator Repop Hoods, 340/s Tool Boxes

Re: Liquidator Repop Hoods, 340/s Tool Boxes

Re: Liquidator Repop Hoods, 340/s Tool Boxes

Re: Liquidator Repop Hoods, 340/s Tool Boxes

Re: Liquidator Repop Hoods, 340/s Tool Boxes