Hi there
Anyone got pics or instructions on how to align my drive belt on my 1977 JD300 I down loaded the manual and I have looked and looked and it does not seem to be in there.
Thanks
Belt alginment on a 300
Re: Belt alginment on a 300
sorry I meant to say sheave alignment I say somewhere that a 400 is 9/32 and a 500 is 1/4 but nothing on a 300 thanks
-
400brian
- Posts: 5612
- Joined: Wed Jul 20, 2005 12:00 am
- Real Name: James T. Kirk
- Location: South Central Wisconsin
Re: Belt alginment on a 300
The tool used was JDM-42 clutch pulley alignment tool. One side has the offset for the JD clutches ( Comet ) and the other side has the Salsbury offset.
The manual doesn't give the measurement, I would have to measure mine.
OK, here's what I found: The Comet clutch has a 5/16" offset. The Salsbury clutches require a 1/4" offset
The manual doesn't give the measurement, I would have to measure mine.
OK, here's what I found: The Comet clutch has a 5/16" offset. The Salsbury clutches require a 1/4" offset
'09 Vintage Challenge Survivor, and I wasn't late for supper!
'10, '11, '12, '13,'14,'15,'16,'17, '18, 19, 20, 21, 22 Vintage Challenge Survivor !
72 400 restored, Father bought new in '71
73 X8 restored
'74 340 green machine
'74 X8 9 time VC finisher
'78 Spitfire in progress
2 '75 340S 1 running, one on deck
'78 LF 440 future CC clone
'73 Skiroule RTX 440, 500 mi.
Re: Belt alginment on a 300
Awesome thanks again Brian