340/S clutch help

8ho · Post by **8ho** » Sun Feb 10, 2008 7:24 pm

if someone with a manual for a 340/s I would like the center to center distance for the clutchs.Had to pull the motor and I don't think I got it right and I don't have the manual thank you steve went to albright shores sat. and 3 DNR clowns drove thought the pits on sled making out like they were looking for someone I guess not many people fishing so they need the $$$ from us sleder

kioritz · Post by **kioritz** » Mon Feb 11, 2008 11:23 am

From edge of driven clutch sheave to the edge of drive clutch sheave should be 4.30" according to the 340/S service textbook.

8ho · Post by **8ho** » Mon Feb 11, 2008 8:35 pm

thank you for the info. it said to take the measurement from between the clutchs and not the center of the shafts. I will give this a try thank you steve

8ho · Post by **8ho** » Wed Feb 13, 2008 9:00 pm

the center to center measurement will help the side to side is fine I don't smoke the belt.It just is not running up in the clucth it is about 3/4 of and inch from the top I droped the top gear from a19 to a 16 the merc. just get out of the corners alittle faster then me. Got beat at A.S. last weekend by 6inch

8ho · Post by **8ho** » Thu Feb 14, 2008 8:57 pm

I think it is close that is why I changed the gears will see if this work sat.Going to lucky thumb this saturday.went there two weeks ago for the frist time and all I can say is people up ther like to watch sled races.Because that place was packed